Installation & Assembly

Care instructions:

• This items is intended for indoor use only. To prevent fading, avoid placing item in direct sunlight.

• To clean, use any furniture polish such as “Pledge” with a soft cloth. apply the polish to the cloth the wipe

it.

• Wipe spills immediately.

• Avoid the use of cleaners or abrasives as they may damage the finish.

• To prevent marking, do not write directly on surface.

• To prevent discoloring, do not use rubber-based place mats.

• Do not place hot plates/cups or cold drinks directly on the surface.

• KD furniture should be tightened periodically to avoid damage. DO NOT OVER-TIGHTEN.

MAH042

Pre-Assembly :

• Please read all the instruction carefully and completely before assembly.

• Remove all part and hardware from box along with any plastic protective packaging.

Do not discard any contents until after assembly is complete to avoid discarding small

part or hardware accidentally.

• For your convenience and ease, assembly by two people is strongly recommended.

Part Included :

• (1) table top (A)

• (1) Legs (B)

Tools Needed

• Phillip screw driver

Assembly Instructions :

1. Carefully lay the tabletop ( A ) upside down on a carpeted or scratch-free surface.

2. Align the legs (B) and attached with small screws the tightened the screws

Thank you for your purchase

Add screws here