Instructions / Assembly

Diagram 1.
Diagram 3.
Diagram 2.
Diagram 4.
Step 3.Attach mantel top crossbars (Part F)into the
mantel top (Part D)by using small screws
(RF10002) as per Diag.3.The side with larger hole
should face away from the top.
LIST OF WOODEN PARTS
LIST OF HARDWARE
NO
A
B
C
D
E
F
RF10003
RF10002
RF40001
RF40103
RF10004
RF50003
RF10003
DESCRIPTION
LEFT PANEL
RIGHT PANEL
SHELVES
MANTEL TOP
BACK CROSSBARS
MANTEL TOP CROSSBARS
SCREW JCA 1/4" x 32
SMALL SCREWS
WOOD PLUGS
ALLEN KEY
SHORT SCREWS
L-BACKET
Q'TY
1
1
4
1
4
2
20
8
20
1
4
2
RF10003
E
E
A
C
RF10003
A
C
RF10002
RF40001
RF40103
B
D
F
RF10002
Step 1. Lay the left panel (Part A) on a soft surface .
Then attach shelves ( Part C)by using screws
JCA 1/4" x 32(RF10003) and attach back crossbars
(Part E)into left panel (Part A ).
Make sure the tapered edge faces upward.
BECAREFUL,DO NOT OVER TIGHTEN THE SCREWS.
You may cover up screw holes with the enclosed wood
plugs (RF40001) as per Diag.1.
Step 4. Lift the mantel top and set it on top of
the bookcase. Fasten with screws
JCA 1/4" x 32(RF10003).
You may cover up screw holes with the
enclosed wood plugs (RF40001).as per Diag.4.
Step 2. Attach right panel (Part B)into them by using
screws JCA 1/4" x 32(RF10003).
You may cover up screw holes with the
enclosed wood plugs (RF40001) as per Diag.2.
RF40001
RF40001
Please contact Home Decorators
Collection Customer Service at
[phone]
for parts or other product issues.
RF10004
RF50003
D
RF10003
RF40001
RF10002
RF10004
RF50003
Step 5 . Used 1-2 L-brackets (RF50003) and short
screws (RF10004) to attach two side panels
under the mantel top to the studs in the wall,
using screws small (RF10002) per Diag. 4.
ASSEMBLY INSTRUCTION
Montego High Bookshelf.
HDC#: 02184 MFG#: 324-5X
D
E
A
B
C
F