600-2X(Large) Page 1 of 4 Assembly Instructions Item Number : 600-2X Product Name : Pet Crate End Table (Large) Pet Crate End Table (Large)
600-2X(Large) Page 2 of 4 Parts Top Panel (A) 1 Pc. Bottom Panel (B) 1 Pc. Left Panel (C) 1 Pc. Right Panel (D) 1 Pc. Door (F) 1 Pc. Back Panel (E) 1 Pc.
600-2X(Large) Page 3 of 4 C D 04 0 10 RF x 16 3 00 50 RF x8 Diagram 1. E Step 1. Attach L-Bracket (RF50003) into the pre-drilled holes on the Left Panel (C), Right Panel (D) and Back Panel (E) using 16 screws (RF10004) as per Diag. 1. RF10004 E x2 C D C D A A RF10004 x6 Step 2. Attach Left and Right Panel (C&D) into the pre drilled holes on the Top Panel (A) using 6 screws (RF10004). Then attach Back Panel (E) using 2 screws (RF10004) as per Diag.2.
600-2X(Large) Page 4 of 4 R 41 00 1 F x6 B E Step 3. Attach Bottom panel(B) into the assembled using 6 screws (RF10041) as per Diag. 3. C D A Diagram 3. A F D C F B F Diagram 4. 2 00 40 RF x2 9 00 40 RF 4 05 x2 44 RF x2 Step 4. Assemble spring(RF40002) + door pin(RF40009) + washer(RF44054) per diagram. Warning, hold the pin with finger so it doesn't flew away from the force of the spring. Gently insert all three part into predrilled holes at the door(see diagram).