Operating Guide

10
CONTROLS
Display
This generator is equipped with a display that
can show the Voltage, frequency, total
accumulated hours of operation, and current
hours. Use toggle switch (1) to change the
readout of the display to the desired setting.
Generator Switch
Generator Switch Generator Switch
(Pull Start) (Electric Start)
For pull starting the generator, turn the generator
switch to the on position “ I ” before starting the
generator. For models with electric starting, turn
the generator switch to the start position “ ”.
To turn off the generator, turn the generator
switch to the off “ 0 ” position.
Fuel Switch
The fuel switch controls the flow of the fuel from
the fuel tank to the carburetor.
Turn the fuel
switch to the on “I” position before starting the
engine. Turn the fuel switch to the off "O"
position after stopping the engine.
Choke
The choke is used to provide more fuel when
starting a cold engine. If the engine is cold, pull
the choke knob out before starting the engine.
Once the engine starts, slowly push the choke
knob in.
Recoil Starter
To start the engine, slowly pull the starter handle
until resistance is felt, then quickly pull the
starter handle the rest of the way.
Do not allow the starter handle to snap back
against the engine. Return it gently in order to
prevent damage to the starter.
O
I