B30 User Manual
Table of Contents 1. Security ..................................................................................... 4 2. Getting Started ........................................................................... 7 2.1. 2.2. 3. Batteries ............................................................................... 7 2.1.1. Installing and uninstalling the battery ....................... 7 2.1.2. Charging the battery ............................................... 7 2.1.3. Using the battery .....
9. 8.5. Profiles ............................................................................... 16 8.6. Connections ........................................................................ 16 Multimedia ............................................................................... 16 9.1. Camera ............................................................................... 16 9.1.1. 9.2. Camera settings include: ....................................... 17 DV ......................................
1. Security Emergency call In any country, the user can dial 112 (or other emergency call number) for emergency help. Note: Based on the nature of cellular networking, the success of the emergency call cannot be guaranteed. Safe usage Switch the phone off in hospitals and aircraft. Obey any restrictions. Wireless devices can affect the medical treatment and cause interference in aircraft. Some medical devices such as hearing aids and pacemaker may be sensitive to external radio frequency emissions.
internal circuit. Use only damp cloth or non-static cloth to clean the phone. Do not use alcohol, thinner, benzene or other chemicals or abrasive cleaner to clean the phone. The phone will become warm under normal use and while in battery charging. Do not leave the phone with battery uninstalled or with the battery empty for a long period of time. This may cause data loss. The metal parts of the phone may irritate the skin depending on the individuals health condition.
car dealer. Stop using the phone in the car until a qualified technician diagnoses the issue. Only qualified technician can install the phone permanently into a vehicle. If the vehicle is equipped with an air bag, do not place the phone above the air bag, or in the air bag deployment area. Turn off the phone when in a petrol station or any place where using wireless equipment is prohibited.
2. Getting Started 2.1. Batteries The battery is included in the package. The battery holds a small amount of charge and can be used immediately after unpacking. It performs best after three full charge/discharge cycles. Recommendation is to use the phone until battery charge is depleted then charge the battery for at least 12 hours. 2.1.1. Installing and uninstalling the battery To install the battery, remove the back cover from the phone: A.
2.1.3. Using the battery The waiting time and calling time capacities specified by the phone manufacturer are obtained under the ideal operating environment. The actual values will vary with the network condition, operating environment and operation method. Please comply with the local regulations of disposing the battery (such as recycling). Do not dispose it as household waste. 2.1.4.
2.2.3. Installing and uninstalling a Memory card Power off the device; remove the battery; disconnect charger. Insert the memory card into the Memory card slot, as per diagram in the battery compartment of the device. Unlock the Memory card securing mechanism by gently sliding the metal catch towards the left of the device and lifting away from contacts. Fit the Memory card into the Memory card slot, lower the locking mechanism and gently slide to the right locking the Memory card in place.
3. Call Function After the setup described in the previous sections is complete, the user is ready to make and receive calls using the information provided in this section. Note: When using headset, please plug/unplug the headset gently to avoid damaging the headset jack. 3.1. Phone power on/off Press and hold the End key to power on/off the device. The device will automatically test whether the SIM card is plugged in after power-on.
quick search of the names. 3.3. Answer call When there’s an incoming call, the phone will notify through vibration, ringing, vibration plus ringing. The name and phone number of the caller is shown on the screen if the network supports the service. The user may answer or reject the call. If call waiting is on, (The user needs to apply for this service to your network carrier.) when the user is on the phone and there is another incoming call, the device will indicate this with a short tone.
4. Main Menu On the Standby screen, unlock the phone then press Left soft Key to enter the Main Menu. The user can then access the various functions and operations. Contacts Phonebook: Press Left soft Key to access the contacts, New, Import/Export, Others Message: Write message, Inbox, Outbox, Drafts, Sentbox, Templates, Broadcast message, Voice mail server, Email. Call Logs: Missed calls, Dialed calls, Received calls, Rejected calls, Delete all, Call timers, GPRS counter.
6. Message This chapter introduces the message services provided by the GSM network. Some services may not be supported by the Network provider. 6.1. Write message 6.1.1. SMS Enter the SMS editor screen via the Menu screen, select message, and select “Write message” choose new SMS. To add a contact press the Center navigation button (Yellow key) and select the contact using the “down” and “up” navigation keys to. This is confirmed by pressing Center, tick appears in the selected box, press options and Ok.
6.4. Drafts Draft messages and message to be finalised are stored here. Options are Open, New message, Delete, Copy to Phone/SIM, Mark and View Detail. After selecting to read a message, the user will enter the message editor. 6.5. Sent box Sent messages are saved here. The user options include: Open, new message, Delete, Delete All, Forward, Move to Phone/SIM, Copy to Phone/SIM, Mark and Sort.
8. Settings 8.1. Call settings Dual-SIM: Standby mode, Reply by original SIM, Set SIM name Call Divert: The user can set the SIM card to Call divert Call waiting: The user can activate the call waiting, cancel or check the status. Call barring: The user can set call barring, All outgoing calls, All incoming calls, incoming calls when roaming, ISD Calling, Dial when International roaming, cancel all barring and assign or change a password.
8.4. Security The user can set Phone lock, SIM lock, and Auto keypad lock here. PIN: The user can create and modify the SIM 1 pin code Modify PIN2: The user can create and modify PIN2 passwords. The user needs to have the default Pin numbers from the network carrier. Phone locked: The user can create and modify phone password. The default is 1234 Modify the cell phone password: The user can create and modify the four to eight digit phone password.
navigation key to take the picture. 9.1.1. Camera settings include: Image viewer：The user can View the images that have been saved Image viewer options: Allows the user to Set as wallpaper, Power on display, power off display, Set as contact icon, Delete, Share, Mark, Rename, Slide play and Details.
9.3. Image The user can view the saved images and enter into the camera settings, by selecting the Camera options and then settings the user can further enhance the image. Settings, Slide settings: Effect order: Order effect, Box extend, Grid extend, Leftward extend, Rightward extend, Upward extend, Downward extend and None. Delay time: the user has the option to select 2 seconds, 3 seconds, 6 seconds, 10 seconds, 16 seconds and 20 seconds. 9.4.
9.7. FM radio The user can receive and listen to FM radio, the headphones provided with the phone will need to insert into the audio jack at the base of the device. Functions are also available via the Options menu: Auto Search and save: this activates the Automatic search and save the channel Channel list：There are 40 channels available the user can populate these using the Auto search and save feature option. Save：Save to the Channel list Manual search：Manually search for the desired channel.
10.5. Unit conversion Weight, length and kg - pound to kg - ounce conversion 11. Games 11.1. Sokoban Mobile phone game, Options: New game, Continue, Select level, Help 11.2. Snake Mobile phone game, Options: New game, High score, Level, Help 11.3. Tetris Mobile phone game, Options: New game, Continue, High sore, Select level, Help 12. Organizer 12.1. Calendar The user can select dates and program activities (subject) and reminders, date and time selecting an alert (ringtone).
Rename: Allows the user to change the name of the profiles saved. Ring settings: allows the user to select different ring tones for Sim 1 and Sim 2 (SIM 1 Call ring, SIM1 Message ring, SIM2 Call ring, SIM 2 Message ring). Adjust Volume: Allows the user to select the ring tone and volume for a number of options. Ring type: Allows the user to select the ring type and volume for a number of options.
Do not attempt to open or disassemble the phone, all service activities need to be conducted by authorized personnel. Do not drop, crush or shake the phone to avoid damaging the internal circuit board. Do not use harsh chemicals, cleaning solvents or strong detergent to clean the phone. Do not paint the phone as the paint may obstruct the removable parts and affect operation. Use only the supplied or an approved replacement antenna.
CE SAR Compliance This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits is 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.
EU Declaration of Conformity We, hereby declare that the essential requirements set out in the RED Directive 2014/53/EU, have been fully fulfilled on our product with indication as below: Product Name Mobile Phone Brand Name / Model CAT / B30 The following standards have been applied for the investigation of compliance: Safety Safety (Adaptor) EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 EN50332-1:2013; EN50332-2:2013 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 Health EN 50360:2001+A1:201
