User Manual
Table Of Contents
- WARNINGS
- TECHNICAL SPECIFICATIONS
- MACHINE COMPONENTS
- MACHINE SET UP
- SQUEEGEE ASSEMBLY INSTALLATION
- PAD DRIVER/BRUSH INSTALLATION
- SOLUTION TANK
- SQUEEGEE RUBBER BLADE REPLACEMENT
- OPERATION
- Machine Storage
- DAILY MAINTENANCE
- MONTHLY MAINTENANCE
- TROUBLESHOOTING
- GLOBAL EQUIPMENT COMPANY INC.
- FLOOR CARE EQUIPMENT WARRANTY
C20E Model 641745
4
MACHINE SET UP
Package Contents:
1) Machine
2) Squeegee Assembly
3) Pad Driver/Brush
Machine Set-up/Operation Prior to each use:
1) Always plug into grounded outlet rated 120V/60Hz.
2) Check that squeegee assembly is properly installed.
3) Check that Pad Driver is properly installed.
4) Ensure the working surface can support the weight of the machine.
5) Always close Recovery Tank cover fully before use.
GFCI (Ground Fault Circuit Interrupter) plug
WARNING
Verify that the GFCI plug works properly before each use.
1) Connect the GFCI plug to the wall outlet.
2) Press the "Reset” button. The plug indicator light will turn on. Then press the "Test” button.
The indicator light will turn off with a "click" (trip) sound. The power is now off.
3) Then press the "Reset" button again. The plug indicator light will turn on. The power is now on.
4) Confirm that the power cord plug and the GFCI plug are locked by the plug lock before using
the machine. The GFCI is ready to be used.