User Manual

C20E Model 641745
8
DAILY MAINTENANCE
WARNING
Before performing any maintenance on the machine, make sure that the power is turned off or the
batteries are disconnected. Repairs are to be completed by authorized service centers only.
1) Wipe the whole machine with clean/damp cloth.
WARNING – Check local regulations for properly disposing wastes before emptying
tanks.
2) Empty the solution tank by opening
the Solution Drain Plug located at
the bottom-left corner of the back of
the machine.
3) Empty the recovery tank by
removing the Recovery Tank Drain
Hose from the hook on the back of
the machine and opening the hose
lid. Rinse out the Recovery Tank
with clean water.
4) Remove the Pad Driver/Brush and Squeegee Assembly and clean with clean water.
5) Remove the Shut-off Float and rinse with water. Ensure there is no foam in or on the float.
MONTHLY MAINTENANCE
1) Flush out solution tank with clean water.
2) Remove the clear cap and the solution tank filter. Clean the
filter with clean water.
3) Clean rubber skirt on the brush head assembly by removing
the spring lock.
4) Turn on and off the Pad/Brush and Vacuum motors to ensure
the motors are still working properly.
Solution Drain Plug
Water Flow Ball Valve (closed)
Shut-off Float
Brush Head Spring lock