User's Manual

• Tap to configure the camera settings.

• Tap to configure image blending. The options are Thermal Only , MSX , Blend IR And Visible

or Visible Only . With MSX or Blend IR and Visible selected, drag the slider to alter the

intensity of the overlaid image.

Drag the Macro slider to adjust thermal and visible camera alignment when you are looking at an object

close to the phone.

• Tap to add a Spot Meters or Regions Of Interest to the image.

• Tap to display the IR Scale on the right side of the image. The IR Scale shows the relationship between

the temperatures detected and the colours displayed in the image. You can manually set a locked IR Scale

either by tapping the upper and/or lower value and manually typing in the desired temperature, or by

sliding/pinching the IR Scale. Double-tap the IR Scale or tap to unlock, and return to automatic

temperature ranging.

• Tap to lock the temperature range shown on screen to the current values. Tap to unlock, and

return to automatic temperature ranging.

• Tap to Toggle High Temp Measurement between off (up to 120º C) and on (up to 400º C). Keep High

Temp Measurement off for use in normal conditions for greater accuracy.

• Tap to manually perform an image calibration. See section on Tuning.

3. Tap to take your photo.

SHOOTING A VIDEO

1. Tap and select to switch to Video mode.

2. Tap to start recording. To stop shooting, tap .

CREATING A TIME-LAPSE VIDEO

1. Tap and select to switch to Time-lapse mode.

2. Tap to open the Time-lapse setting menu. Configure as necessary.

3. Tap to start recording. To stop shooting, tap

VIEWING YOUR CAPTURED PHOTOS OR VIDEOS

Open the latest captured photo or video by tapping the thumbnail image in the bottom right hand corner of

the screen.

• Tap to switch to the Library view.