Instruction Manual for the Ceramic Hob Model:EC60T2
Dear customer, Thank you for purchasing our ceramic hob. Please read this instruction manual carefully before using and ensure it is installed by a qualified electrician and to current UK regulations. Care & Maintainence • Avoiding banging pots and pans down on the hob.
Safety 2 Residual heat indicators After using the hob, residual heat remains in the heating area. The LED shows the code “H” which indictates that the zone is not safe to touch 3 Auto shut down protection During operation the hob will automatically shut off as detailed in chart below Power level 1 2 3 4 5 Default working time(hour) 8 8 8 4 4 6 4 7 8 9 2 2 2 Installation 1 Selection of installation equipment Drill holes on the work surface in accordance to the sizes shown below.
2 Under all circumstances, make sure the ceramic hob is well ventilated and the air inlet and outlet are not blocked. Ensure the ceramic hob is in a good work state. As shown in Figure (2) Mini 750mm mini 5 cm Air exit mini 5 mm mini 2 cm Air intake Figure (2) Note: The safety distance between the ceramic hob and the cupboard above the hotplate should be at least 750mm.
Please note 1. The ceramic hob must be installed by qualified personnel or technicians in accoradance with current regulations. Please never conduct the installation by yourself. 2. The ceramic hob should not be mounted above cooling equipment, dishwashers and rotary dryers. 3. Please ensure there is adequate ventillation underneath the ceramic hob to enhance its reliability 4. A steam cleaner is not to be used.
The ceramic hob appearance Glass plate Power cord Control panel ON/OFF Schematic diagram of the control panel Timer Childproof lock key Power/Timer regulating key ON/OFF Instructions for Use Put the pan in the centre of the heating zone. Preparation before using After power on, the buzzer bleeps once, all the indicators light up for 1 second then go out, indicating the ceramic hob enters into standby mode.
Operation Instructions: After the " ON/OFF "key is pressed,all the indicators show " - ".Then you can set the heat setting of corresponding heating zone Note: 1. In standby working mode, touch the “ON/OFF” symbol the heating zone will restore to the standby working mode if there is no heat setting within 2 minutes. 2. Every heating zone is independent each other. ON/OFF Timer function Press the timer key, then the indicator flashes, and at this point, you can set time.
Safety Reminder and Maintenance A dedicated power protection air swith protection air switch must be incorporated in the fixed wiring in accordance with the wiring rules. Never use the ceramic cooker hob in high temperature environments such as near a gas stove or kerosene stove. Do not put any detergents or flammable materials in the equipment installed under the ceramic hob. Do not leave metallic objects, such as knives, forks, spoons and lids on the hob as they may get hot.
DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. Indoor use only. Clean the ceramic hob on a regular basis to prevent the build up of food residue Care and Maintenance You can easily clean the surface of the ceramic hob if following the methods given in the table.
Your guarantee For any failure of the product, please contact the customer service centre. 1. There is a 2 year guarantee with this ceramic hob 2. The period of warranty shall start from the date on which the invoice is issued. 3. Any one of the following cases is not covered by the guarantee: Damage caused by improper use, storage and maintenance. Damage caused by unauthorized disassembly and repair. Valid receipt cannot be present. Damage caused through mis-use.
