Instruction manual and guarantee IM-rocook-EN.
IM-rocook-EN.
Instruction manual Using the Manual Congratulations on your purchase of ROCOOK Induction. Before the first use, please read this user manual and pay special attention to safety warnings. We recommend you to keep the manual for consultation and we hope you enjoy the experience of cooking at low temperatures. IM-rocook-EN.
IM-rocook-EN.
IM-rocook-EN.
SAFETY INSTRUCTIONS GHT OR RAIN. DO NOT INSTALL OUTDOORS. The ROCOOK Induction meets - THE APPLIANCE IS NOT INall requirements for electrical TENDED FOR INSTALLATION safety and electromagnetic IN YOUR CAR, CARAVAN OR compatibility of appliances SIMILAR. required by directives and re- CHILDREN UNDER 8 SHOULD gulations. STAY AWAY UNLESS THEY - THE MAINTENANCE OF THE ARE UNDER CONSTANT APPLIANCE MUST BE PERADULT SUPERVISION. FORMED BY QUALIFIED PERSONNEL.
- IT CAN BE USED IN FARMS, AND DAMAGE THE SENSOR KITCHENS IN OFFICES OR AND TEMPERATURE PROBE. SHOPS, IN HOTELS; MOTELS - TO CLEAN THE COUNTERAND SIMILAR RESIDENTIAL TOP DO NOT USE ANY STEAM APARTMENTS. CLEANER, NOR GASOLINE, - BE AWARE THAT COOKING ALCOHOL OR THINNER. WITH GREASE OR OIL CAN - METALLIC OBJECTS SUCH AS PROVE DANGEROUS, CAUKNIVES, FORKS, SPOONS AND SING OVERHEATING AND/OR LIDS SHOULD NOT BE PLACED FIRE. ALWAYS COOK WITH ON THE ROCOOK SURFACE TO ANOTHER PERSON PRESENT. PREVENT THE HEATING.
be set up to ensure the applianDIFY THE OPERATION WIce can easily be unplugged. THOUT VALIDATION ON ROCOOK CONTROL ITSELF. - Do not install the unit near heat sources or flammable - DO NOT DISCONNECT THE materials. MACHINE BY PULLING THE CABLE. IT IS BETTER TO PULL - Do not install the appliance enclosure where there can THE PLUG. be potential gas leaks. - USE ONLY THE TOP PROTECTORS DESIGNED BY THE MA- - Install the unit on a flat surface that can support the NUFACTURER OFTHE COOKING weight of the device.
- Do not use this product to heat the air. - Do not use it for drying clothes or other items. grade if you use for lengthy periods of times above this recommended temperature. - Danger: when removing the pot inside the sensor or the tempe- The appliance and its accesrature probe, these can burn. sible parts may become hot during operation.
- If the appliance produces - Do not put the ROCOOK, the a strange noise, or smell of temperature sensor or micro smoke, disconnect the plug USB cable probe directly unand contact the authorized der the tap connection service. - After use, turn off the corresponding device and do not rely on the cookware detector. - Do not try to extinguish a fire - The ROCOOK, the sensor and temperature probe cannot with water, unplug the applianbe washed in the dishwasher. ce and then cover the flames e.g.
Index 1 Installation 2 ROCOOK Induction. Devices, components and parts. 3 Before the first use 4 Cooking containers (pots and pans) 5 Use. Operation 5.1 Cooking with temperature control 5.1.1 Cooking with medium temperature + time 5.1.2 Cooking with medium temperature + core temperature 5.2 Traditional cooking with power levels 5.3 Functions and indicators 5.4 Temperature sensor. Load and operation 5.5 APP. Application for mobile phones and tablets. 6 Maintenance and cleaning.
1- Installation Do not place or use the ROCOOK on an inclined or uneven surface, Similarly, do not place on a surface that – if subject to temperature variations – could easily break. 2- ROCOOK Induction: Devices, parts and equipment parts. Do not obstruct the air inlet which is located at the bottom of the ROCOOK nor the output which can be found on the back of the appliance. Do not block these openings for ventilation with any object. Respect the security dimensions described in figure.
- Touch control panel slider for easy handling and keys + / - for precise adjustment. Core temperature Medium cooking temperature Cooking time Power levels cooking 00 055 00:15 2 ON OFF PLAY Cooking Slider control (- +) ON / OFF button to turn on and off ROCOOK Induction. Core temperature button and display. Used to set the temperature in the inner part of the food in case of using the core probe (optional). Medium cooking temperature button and display.
- Signaling of cooking phase display Fixed purple light. Standby Fixed blue light. Cocción en proceso Intermittent blue light. Waiting for manual operation Fixed green light. Cooking finished Fixed red light. Error - USB port. It allows charging battery temperature sensor using the USB charging cable. Signaling of cooking phase display - Cooking medium temperature sensor, for temperature control of the cooking liquid medium (water, broth, oil, sauces...) contained inside the container.
- Core temperature probe of the food (optional accessory). It is used to control the temperature in the inner part (core) of the food. To use it, you must connect to the Mini-USB port located on the temperature sensor. - Bag (optional accessory). To properly store the temperature sensor, the probe and cables. - Tongs for pans. It allows you to set the temperature sensor in pans or saucepans. - Power cable. - USB charging cable.
3- Before the first use Carefully unpack the ROCOOK Induction and devices. Place the device on a flat surface and with sufficient distance to adjacent walls. First connect the ROCOOK power plug and then to the network connection. Fully charge the battery temperature sensor using the ROCOOK Induction power point or an external universal adapter. You can use the mobile phone, tablet or other devices charger, as long as the charger does not exceed 5V and 1000mmA. 5- Usage . Operation.
2- Turn on the temperature sensor by pressing the ON / OFF button located on the sensor itself. The sensor’s LED flashes in green until ROCOOK and the sensor become linked with each other, at that moment the LED will be fixed (green, orange or red depending on battery level) and the Bluetooth LED will light in the display of temperature. If it does not work because the battery’s sensor is depleted, connect the sensor cable to the USB jack and repeat. medium with which we want to cook.
8- Press PLAY to start the cooking process. The temperature of the liquid medium will be maintained at the previously selected temperature for the time entered in the time display. The ROCOOK LED remains on fixed blue. This option needs the optional core temperature probe and it is the most advanced control mode. It allows you to control the end of cooking through the core probe so that the ROCOOK cooks until the core of the food reaches the temperature that we have pre-established.
3- Place the temperature sensor in the container, which will be with the selected medium. re sensor, to poke the core probe in the food and insert the food into the liquid medium. 4- Select the desired temperature of the liquid medium with which you want to cook (as in the previous case 20-180°). 5- Select the core temperature at which you want to reach the desired cooking point for your food. The ROCOOK allows you to program a minimum core temperature of 40° and a maximum of 85°.
-The steps to follow are: 1- Press the ON / OFF button. When you turn ROCOOK on, the LED bar from the cooking status will be lit in purple. 2- Press the Traditional cooking by levels button. 3- Select the desired power using the slider or the + or - buttons (it will remain active after 3 seconds). 0 9/P The steps to follow are: 1- Once we have selected the power level, you must press the button and select the desired time using the slider or + or -.
NOTES: cally turn off and 3 short beeps will be issued - The power density obtained with the boos- (as when the OFF button is pressed). ter function can be excessive for heating oil In case of conflict with the value of the ti- or frying. The base of the container may su- mer that had been selected, automatic dis- ffer overheating. connection times have priority of this section.
- To match the sensor with the ROCOOK turn the temperature sensor on by pressing the ON / OFF button located on the sensor itself. The sensor LED flashes in green until the ROCOOK and sensor become linked with each other, at that moment the LED will remain fixed (green, orange or red depending on battery level) and the Bluetooth LED will light in the display of temperature. If it does not work because the sensor’s battery is depleted, connect the sensor cable to the USB jack and repeat it.
5.5 APP. App for mobile phones and tablets. The ROCOOK app is an application (available for Android and iOS) to delve into the world of gourmet cuisine in a comfortable and intuitive way, allowing users to discover recipes, send them from the application to the ROCOOK, control the process and finally taste the result. A fast and dynamic solution to get to slow cook. Many applications are built to monopolize the time of each user. This app is designed to save time and facilitate the cooking process.
7- Frequently Asked Questions and Troubleshooting Please, follow these instructions if small errors or warning messages appear on your ROCOOK. Do not try to make other repairs if these instructions are of no help. If you check an error, unplug the ROCOOK for about 15-20 seconds and plug it back. Use ROCOOK again checking if the problem persists. - What do I do if the ROCOOK does not turn on? Make sure the power cord is correctly inserted and pressed into the ROCOOK socket and the wall outlet.
- What do I do if the following messages appear on the display? Message Reason Solution Sens1 The ROCOOK detects that there has been an anomaly in cooking, it may be that you extracted the temperature sensor from the cooking medium, that we have left us without liquid and the sensor has been exposed. The error may appear as a warning and ROCOOK can turn off the device and avoid overheating safety. Restarting the ROCOOK and cooking, respect the rules and sequence of usage.
8- Guarantee and assistance. Before heading to the repair shop for repair see chapter FAQ and troubleshooting. If the problem persists note the specific problem and the conditions in which it appears. Note the date of manufacture on the data plate located on the bottom of the device and call the technical service. The repair of the device must only be performed by a qualified technician.
9-Technical data. - Dimensions of the device: 290 mm width 360 mm deep 65 mm height - Weight : 3,7 kg. - Voltage and net frequency: 220 / 240 V - 50/60Hz - 2000W high power - Temperature sensor: Minimum programmable liquid medium temperature 20° / Maximum programmable liquid medium temperature 180°. - Core probe: Minimum programmable core probe temperature 40° / Minimum programmable core probe temperature 85°. - Time setting.
www.cata.es IM-rocook-EN.indd 28 60815945.16.06.2016 ROCOOK@cnagroup.es Tel.
