Instruction Manual

8- Press PLAY to start the cooking process.
The temperature of the liquid medium will
be maintained at the previously selected
temperature for the time entered in the
time display. The ROCOOK LED remains on
fixed blue.
9- When the cooking is done ROCOOK will
warn you with a beep, with the end message
and the green LED on, then remove the food
and serve it.
5.1.2 Cooking with temperature medium
+ core temperature
This option needs the optional core tempera-
ture probe and it is the most advanced control
mode.
It allows you to control the end of cooking
through the core probe so that the ROCOOK
cooks until the core of the food reaches the
temperature that we have pre-established.
The steps to follow are:
1- Press the ON / OFF button. When you turn
the ROCOOK on, the LED will be lit in purple
in the cooking status bar.
2- Turn on the temperature sensor by pressing
the ON / OFF button located on the sensor
itself. The sensor LED flashes in green un-
til ROCOOK and sensor become linked with
each other, at that moment the LED will be
fixed (green, orange or red depending on
battery level) and the Bluetooth LED will li-
ght up in the display of temperature.
If it does not work because the sensor’s ba-
ttery is depleted, connect the sensor cable
to the USB jack and repeat the operation.
00:15
2
055
00
IM-rocook-EN.indd 18 8/7/16 11:40