Instruction Manual

-The steps to follow are:
1- Press the ON / OFF button. When you turn
ROCOOK on, the LED bar from the cooking
status will be lit in purple.
2- Press the Traditional cooking by levels
button.
3- Select the desired power using the slider or
the + or - buttons (it will remain active after
3 seconds).
0 9/P
2
4- Place the container on the ROCOOK to start
the cooking process. the LED bar from the
cooking status will be lit in fixed blue.
Once you have selected a power level if we
want to change this level to increase or de-
crease the power, press the Traditional coo-
king by levels button again.
The Traditional Cooking option also allows you
the opportunity to work with a timer that, at
the end of established time, it will turn the
hob off.
The steps to follow are:
1- Once we have selected the power level, you
must press the button and select the desi-
red time using the slider or + or -.
2- Once the selected time is over, the ROCOOK
will stop and emit an intermittent beep and
the LED on the cooking status bar will be lit
in fixed green and the digits of the displays
that we used, will flash indicating that the
cooking process is over.
- Booster level (P)
From the power level 9, you can access the
Booster level by pressing the + key. This
level is displayed with a ‘P’ on the power
display and provides extra power that can
reach up to 2000W.
There is also direct access to Booster level (P)
from level 0, by pressing the - key.
While the power selection is on, the display
stops flashing and the decimal point remains
flashing. 3 seconds after the last keystroke,
the selected power value is set, the decimal
point disappears and the inductor starts.
The use of this function is limited to a maxi-
mum of 10 minutes. After this time, the power
level will automatically drop to level 9. After
these 10 minutes, you can activate the boos-
ter function again if you have not exceeded
the temperature limit.
IM-rocook-EN.indd 20 8/7/16 11:40