Instructions / Assembly

STEP 1
Place Large Ring upside down (holes
facing up).
STEP 2
Place and lightly fasten each Leg to
Large Ring with Allen Bolt using Allen
Wrench. DO NOT FULLY TIGHTEN
THE BOLTS.
STEP 3
Insert Small Ring into U-shaped bracket
of each Leg. Lightly fasten each Leg with
Allen Bolt using Allen Wrench. DO NOT
FULLY TIGHTEN THE BOLTS.
STEP 4
Invert assembly so that Large Ring is on
top. Tighten all eight Allen Bolts securely at
this time.
STEP 5
Place Fire Bowl into Large Ring.
STEP 6
Attach handle to screen using supplied hardware. Place Screen onto
Fire Bowl as shown, using the recess in the bowl for alignment.
NOTE:
1. As with any burning appliance, periodic maintenance is required to return painted surfaces to original
appearance. When rust appears on painted surfaces, use sandpaper or steel brush to remove particles
and re-coat with paint intended for high-temperature surfaces. Select paint suitable for fireplace
maintenance and follow label directions on the paint.
2. Fire Pit surface will discolor after use. This is normal and expected.
Fire Bowl
(1 each)
Screen handle & hardware
(1 each)
Legs
(4 each)
Large Ring
(1 each)
Small Ring
(1 each)
Allen Wrench
(1 each)
Allen Bolts
(8 each)
Make sure you have all parts before beginning assembly (refer to the Parts Identification List below). If any parts listed below are damaged,
or are missing, please call customer service at 1-800-230-6530 (Monday through Friday 9:00 a.m. until 5:00 p.m. Eastern Standard Time), or
email us at [e-mail].
Assembly Instructions
Parts Identification List
Copyright © 2008, Asia Direct, Inc., Norcross, GAModel #AD115
Screen Lifting Tool
(1 each)
Screen (1 each)
Vinyl Cover (Not Pictured)
(1 each)