Instructions / Assembly

ManualsBrandsCatalina Lighting ManualsLighting1-Light Chrome Elliptical Rings Semi-Flushmount

IMPORTANT SAFETY INSTRUCTIONS

Read and Save:

1. To reduce the chance of fire or electrical shock: Do not install non-factory wiring or any other electrical components.

Altering or modifying the lamp in any way will render the lamp unsafe.

2. Keep curtains, shades, wall hangings and all other fabrics and objects away from the lamp canopy, lamp shade and

light bulb. Unit is not designed to support additional weight. Do not hang objects from the lamp or any lamp part.

3. Unit is to be ceiling mounted only.

Do not pendant mount (hanging by a cable, wire or stem).

4. Before starting the installation, disconnect the power by turning off the circuit breaker or removing the appropriate fuse

at the fuse box. Turning off the power at the light switch is not suficient to prevent electrical shock.

5. This unit is suitable for installation in a dry, indoor location only.

6. Electrical Connections: All electrical connections must be in accordance with local codes, ordinances and the

National Electric Code. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified,

licensed, electrician.

7. This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.

8. Tools and Materials Required: (Not Included) Adjustable wrench, flathead screwdriver, wire cutters, step ladder,

pliers, U.L./CSA listed electrical tape.

LIGHT BULB REPLACEMENT

1. Uses one 60 Watt Edison bulb or CFL or LED equivalent (not included).

2. DO NOT EXCEED RECOMMENDED WATTAGE.

3. Turn off the unit and allow the bulb to cool before touching.

CLEANING AND MAINTENANCE

1. Clean using a mild cleaning solution and a soft cloth.

2. Never use a rough cloth or chemical cleaners containing acids, abrasives or solvents.

20666-001

1-LIGHT COLTON SEMI-FLUSHMOUNT

For Customer Assistance:

www.evolutionlightingllc.com

Made In China

Summary of content (6 pages)

PAGE 1
20666-001 1-LIGHT COLTON SEMI-FLUSHMOUNT IMPORTANT SAFETY INSTRUCTIONS Read and Save: 1. To reduce the chance of fire or electrical shock: Do not install non-factory wiring or any other electrical components. Altering or modifying the lamp in any way will render the lamp unsafe. 2. Keep curtains, shades, wall hangings and all other fabrics and objects away from the lamp canopy, lamp shade and light bulb. Unit is not designed to support additional weight. Do not hang objects from the lamp or any lamp part.
PAGE 2
Installation 1 Installing the fixture assembly NOTE: Make the connections to a 120V AC 60Hz circuit. A 1. Carefully unpack and lay all parts on a clean, level surface. Turn off electrical power at the source by disconnecting the circuit breaker or removing the appropriate fuse. Turning the power off at the switch is not sufficient to prevent electrical shock. 2. Unscrew the canopy nuts (B) from fixture assembly (C) and detach the mounting bracket (A). 3.
PAGE 3
20666-001 LAMPE SEMI-ENCASTRÉE COLTON À 1 LUMIÈRE INSTRUCTIONS DE SÉCURITÉ IMPORTANTES À lire et à conserver: 1. Pour réduire le risque d’incendie ou de choc électrique : Ne pas installer de câbles ou d’autres composants électriques qui ne sont pas du même fabricant. Toute altération ou modification de la lampe d’une quelconque façon la rendra non sécuritaire. 2. Garder les rideaux, stores, tentures et tout autre tissu ou objet éloignés du couvercle de la lampe, de l’abat-jour et de l’ampoule.
PAGE 4
Installation 1 Installation de l’ensemble luminaire NOTE: Faire les raccordements électriques à un circuit CA de 120V AC / 60Hz. A 1. Déballez avec soin toutes les pièces et déposez-les sur une surface propre et plane. Coupez l'alimentation électrique à la source en déconnectant le disjoncteur ou en retirant le fusible correspondant. Couper l'alimentation à l'interrupteur ne suffit pas à éviter les chocs électriques. BB AA C B 2.
PAGE 5
20666-001 SEMI-PLAFÓN DE 1 LUZ COLTON INSTRUCCIONES IMPORTANTES DE SEGURIDAD Leer y conservar: 1. Para reducir las posibilidades de incendio o descarga eléctrica: No instale cableado eléctrico u otros componentes eléctricos que no vengan de fábrica con esta lámpara. Si esta lámpara es alterada o modificada, su seguridad se verá comprometida. 2.
PAGE 6
Instalación 1 Instalación de la luz NOTA: Haga las conexiones a un circuito de 120V AC 60Hz. A 1. Desembale con cuidado todas las piezas y colóquelas sobre una superficie limpia y pareja. Desconecte la corriente eléctrica desde el interruptor de circuitos o quitando el fusible correspondiente de la caja de fusibles. No basta con apagar el interruptor de luz para evitar una descarga eléctrica. BB AA 2.