Installation Guide

BB
A
AA
C
B
HARDWARE:
3PCS
WIRE CONNECTOR
(BB)
2PCS
SCREW (AA)
For Customer Assistance:
www.luciditylights.com
Made In China
2
ASSEMBLY INSTRUCTIONS
1. Preparing the unit for installation
Carefully unpack and lay all parts on a clean, level surface.
Unscrew the canopy nuts (C) from fixture assembly (B) and detach the mounting bracket (A).
Attach the mounting bracket (A) to the junction box (not included) with junction box screws (AA).
2. Make electrical connections to a 120V AC/60Hz circuit.
Lift up the fixture assembly (B) toward the ceiling.
Connect the white wires from the fixture to the white wire of the supply circuit.
Connect the black wires from the fixture to the black wire of the supply circuit.
Wrap the bare copper grounding wire from the fixture around the green screw on the mounting bracket (A), then
connect it to the grounding conductor of the supply circuit.
Use U.L./C.S.A. listed wire connectors (BB) suitable for the size, type and number of conductors. Secure the wire
connectors (BB) with U.L./C.S.A. listed electrical tape.
Tuck all wires back into the Outlet Box.
3.Installing the fixture
Place the fixture assembly (B) against the mounting surface, allowing the preassembled screws on the mounting
bracket (A) to pass through the fixture assembly (B). Secure with previously removed canopy nuts (C).
4. Position Adjustment
Adjust the head to your desired position.
Restore electrical power when complete. Turn on lamp using the wall switch.