Installation Guide

ManualsBrandsCatalina ManualsPendant LightingSputnik Plated Chrome Multi-Light Transitional Pendant

IMPORTANT SAFETY INSTRUCTIONS

For Customer Assistance:

www.evolutionlightingllc.com

Made In China

Read and Save:

1. To reduce the chance of fire or electrical shock: Do not install non-factory wiring or any other electrical components.

Altering or modifying the lamp in any way will render the lamp unsafe.

2. Keep curtains, shades, wall hangings and all other fabrics and objects away from the lamp canopy, lamp shade and light

bulb. Unit is not designed to support additional weight. Do not hang objects from the lamp or any lamp part.

3. Unit is to be ceiling mounted only.

Do not pendant mount (hanging by a cable, wire or stem).

4. Before starting the installation, disconnect the power by turning off the circuit breaker or removing the appropriate fuse

at the fuse box. Turning off the power at the light switch is not sufficient to prevent electrical shock.

5. This lamp is approved for indoor use only.

6. Electrical Connections: All electrical connections must be in accordance with local codes, ordinances and the National

Electric Code. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified,

licensed, electrician.

7. This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.

8. Tools and Materials Required: (Not Included) Adjustable wrench, flathead screwdriver, wire cutters, step ladder, pliers,

U.L./CSA listed electrical tape.

LIGHT BULB REPLACEMENT

1. Lamp uses eighteen 40 Watt E26 Type S Bulbs or CFL or LED equivalent (not included).

2. DO NOT EXCEED RECOMMENDED WATTAGE.

3. Turn off the unit and allow the bulb to cool before touching.

CLEANING AND MAINTENANCE

1. Clean using a mild cleaning solution and a soft cloth.

2. Never use a rough cloth or chemical cleaners containing acids, abrasives or solvents.

20070-000

18-Light Pendant

Summary of content (7 pages)

PAGE 1
20070-000 18-Light Pendant IMPORTANT SAFETY INSTRUCTIONS Read and Save: 1. To reduce the chance of fire or electrical shock: Do not install non-factory wiring or any other electrical components. Altering or modifying the lamp in any way will render the lamp unsafe. 2. Keep curtains, shades, wall hangings and all other fabrics and objects away from the lamp canopy, lamp shade and light bulb. Unit is not designed to support additional weight. Do not hang objects from the lamp or any lamp part. 3.
PAGE 2
Installation 1 Installing the fixture Carefully unpack and lay all parts on a clean, level surface. Assemble all the sockets (G) to the fixture assembly (F). Assemble the tubes (E) to the fixture assembly (F). Assemble the tube (D) to the tube (E). Assemble the canopy (B) to the tube (D). 2 Installing the mounting bracket Unscrew the canopy nuts (C) from canopy (B) and detach the mounting bracket (A). Attach the mounting bracket (A) to the junction box (not included) with junction box screws (AA).
PAGE 3
20070-000 Suspension à 18 lumières INSTRUCTIONS DE SÉCURITÉ IMPORTANTES À lire et à conserver: 1. Pour diminuer le risque d’incendie ou de choc électrique : Ne pas utiliser de câbles ou d’autres composants électriques qui ne sont pas du même fabricant. Toute altération ou modification de la lampe peut la rendre non sécuritaire. 2. Garder les rideaux, abat-jours, panneaux muraux, tissus et autres objets éloignés du couvercle de la lampe, de l’abat-jour et de l’interrupteur.
PAGE 4
Installation 1 Installation du luminaire Déballez délicatement toutes les pièces et placez-les sur une surface propre et de niveau. Assemblez la boucle (F) sur l’ensemble luminaire (G). Réglez la hauteur du luminaire en retirant des anneaux à l’endroit convenant le mieux à l’emplacement du luminaire et à la distance requise du plafond, puis réattachez la chaîne (E) à la boucle (F) à l’aide du maillon rapide.
PAGE 5
20070-000 Lámpara colgante de 18 luces INSTRUCCIONES IMPORTANTES DE SEGURIDAD Leer y conservar: 1. Para reducir las posibilidades de incendio o descarga eléctrica: No instale cableado eléctrico u otros componentes eléctricos que no vengan de fábrica con esta lámpara. Si esta lámpara es alterada o modificada, su seguridad se verá comprometida. 2.
PAGE 6
Instalación 1 Instalación de la lámpara Desembale con cuidado todas las piezas y colóquelas sobre una superficie limpia y pareja. Ajuste todos los portalámparas (G) a la unidad de la lámpara (F). Ajuste los tubos (E) a la unidad de la lámpara (F). Ajuste el tubo (D) al tubo superior (E). Ajuste la cubierta (B) al tubo (D). 2 Instalación del soporte de montaje Destornille las tuercas de la cubierta (C) y sepárelas de la cubierta (B) para separar el soporte de montaje (A).
PAGE 7
Consumer Service Service d’aide aux Consommateurs Servicio al Consumidor http://www.evolutionlightingllc.com LIMITED WARRANTY EVOLUTION LIGHTING warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year from the date of original purchase. Electronic parts including passive infrared devices, photoelectric switching mechanisms, and light bulbs provided with Evolution Lighting products are warranted for 30 days from the date of original purchase.