Installation Guide

ManualsBrandsCatalina ManualsFixed Track Lighting Kits20856-000

IMPORTANT SAFETY INSTRUCTIONS

Read and Save:

To reduce the chance of fire or electrical shock: Do not install non-factory wiring or any other electrical components.

Altering or modifying the lamp in any way will render the lamp unsafe.

2. Keep curtains, shades, wall hangings and all other fabrics and objects away from the lamp shade, light switch and the

light bulb. Lamps are not designed to support additional weight. Do not hang any objects from the lamp or any lamp part.

3. Unit is to be ceiling mounted only.

Do not pendant mount (hanging by a cable, wire or stem).

4. Before starting the installation, disconnect the power by turning off the circuit breaker or removing the appropriate fuse

at the fuse box. Turning off the power at the light switch is not sufficient to prevent electrical shock.

5. This unit is suitable for installation in a damp, indoor location only.

6. Electrical Connections: All electrical connections must be in accordance with local codes, ordinances and the National

Electric Code. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified,

licensed, electrician.

7. This unit is to be mounted to a metal electrical junction box

9. Dimmable to 10% with recommended dimmers: LUTRON-DVCL-153P.

(outlet box) directly supported by the building structure.

8. Tools and Materials Required: (Not Included) flathead screwdriver, wire cutters, step ladder, pliers,

U.L./CSA listed electrical tape.

LIGHT BULB REPLACEMENT

2. Turn off the unit and allow the bulb to cool before touching.

CLEANING AND MAINTENANCE

1. Clean using a mild cleaning solution and a soft cloth.

2. Never use a rough cloth or chemical cleaners containing acids, abrasives or solvents.

Model No.:20856-000

4-LIGHT PAX LED FIXED TRACK

For Customer Assistance:

www.evolutionlightingllc.com

Made In China

1. Integrated LED bulb replacement not required.

10. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment on and off, the user isencouraged to try to correct

the interference by one or more of the following:

< Reorient or relocate the receiving antenna.

< Increase the separation between the lighting unit and receiver.

< Connect the lighting unit into an outlet on a circuit other than the outlet which the receiver is connected.

< Consult the dealer or an experienced radio/TV technician for assistance.

NOTE: Please note that changes and modifcations not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

Summary of content (7 pages)

PAGE 1
Model No.:20856-000 4-LIGHT PAX LED FIXED TRACK IMPORTANT SAFETY INSTRUCTIONS Read and Save: 1. To reduce the chance of fire or electrical shock: Do not install non-factory wiring or any other electrical components. Altering or modifying the lamp in any way will render the lamp unsafe. 2. Keep curtains, shades, wall hangings and all other fabrics and objects away from the lamp shade, light switch and the light bulb. Lamps are not designed to support additional weight.
PAGE 2
Installation 1 Installing the mounting bracket 2 Carefully unpack and lay all parts on a clean, level surface. Unscrew the canopy nuts (C) from the fixture assembly (B) and detach mounting bracket (A). Install the mounting bracket (A) to the junction box (not included) with two junction box screws (AA). NOTE: Make the connections to a 120V AC 60Hz circuit. Connect the white wires from the ﬁxture to the white wire of the supply circuit.
PAGE 3
MODÈLE #: 20856-000 RAIL FIXE DE DEL PAX À 4 LUMIÈRES INSTRUCTIONS DE SÉCURITÉ IMPORTANTES À lire et à conserver: 1. Pour réduire le risque d’incendie ou de choc électrique : Ne pas installer de câbles ou d’autres composants électriques qui ne sont pas du même fabricant. Toute altération ou modification de la lampe d’une quelconque façon la rendra non sécuritaire. 2. Garder les rideaux, stores, tentures et tout autre tissu ou objet éloignés du couvercle de la lampe, de l’abat-jour et de l’ampoule.
PAGE 4
Assemblage 2 du support 1 Installation de montage Faire les raccordements NOTE: Déballez délicatement toutes les pièces et étalez-les sur une surface propre et de niveau. Dévissez les écrous de couvercle (C) de l’ensemble luminaire (B) et détachez le support de montage (A). Faire les raccordements électriques à un circuit CA de 120V AC / 60Hz. Connectez le(s) fil(s) blanc(s) du luminaire au fil blanc du circuit d’alimentation.
PAGE 5
MODELO No.: 20856-000 RIEL FIJA LED DE 4 LUCES PAX INSTRUCTIONS DE SÉCURITÉ IMPORTANTES Leer y conservar: 1. Para reducir el riesgo de descarga eléctrica. No instale cableado eléctrico u otros componentes eléctricos que no vengan de fábrica con esta lámpara. Si esta lámpara es alterada o modificada, su seguridad se verá comprometida. 2. Mantenga cortinas, pantallas, artículos colgantes de las paredes y todo otro artículo textil u objeto alejados de la pantalla, el interruptor y la bombilla de la lámpara.
PAGE 6
Instalación 2 Conexiones eléctricas del soporte 1 Instalación de montaje Desembale con cuidado todas las piezas y colóquelas sobre una superficie limpia pareja NOTA: Haga las conexiones a un circuito de 120V AC 60Hz. Destornille las tuercas de la cubierta (C) de la luminaria (B) y separe el soporte de montaje (A). Conecte el hilo con la superficie acanalada al hilo blanco del circuito de alimentación. Conecte el hilo con marcas y superficie lisa al hilo negro del circuito de alimentación.
PAGE 7
Consumer Service Service d’aide aux Consommateurs Servicio al Consumidor http://www.evolutionlightingllc.com LIMITED WARRANTY EVOLUTION LIGHTING warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year from the date of original purchase. Electronic parts including passive infrared devices, photoelectric switching mechanisms, and light bulbs provided with Evolution Lighting products are warranted for 30 days from the date of original purchase.