Specification

Thomas and Betts Corporation
Product Guide Specification
WIRE AND CABLE FASTENING
26 05 84-5
REVISION 0
9. Low smoke fluoropolymer cable ties shall have a tensile strength rating of 18 lbs and 50 lbs.
10. TYV series shall be UL Listed.
K. Radiation Resistant Fluoropolymer Cable Ties (TYZ series):
1. Radiation resistant cable ties shall be molded from fluoropolymer material.
2. Radiation resistant fluoropolymer cable ties shall have a non-magnetic stainless steel locking
device.
3. Radiation resistant fluoropolymer cable ties shall have a smooth, notchless body.
4. Radiation resistant fluoropolymer cable ties shall have a turned up tail.
5. Radiation resistant fluoropolymer cable ties shall be aqua colored.
6. Radiation resistant fluoropolymer cable ties shall have a UL94V-0 flame rating.
7. Radiation resistant fluoropolymer cable ties shall exhibit high resistance to radiation.
8. Radiation resistant fluoropolymer cable ties shall be rated for 302ºF (150ºC) maximum.
9. Radiation resistant fluoropolymer cable ties shall have a tensile strength rating of 18 lbs, 50
lbs and 120 lbs.
10. TYZ series shall be UL recognized.
L. Dual Locking Stainless Steel Cable Ties (SS series):
1. Dual locking stainless steel cable ties shall be made from type 304 stainless steel.
2. Dual locking stainless steel cable ties shall be fireproof.
3. Dual locking stainless steel cable ties shall resist corrosion.
4. Dual locking stainless steel cable ties shall resist UV light.
5. Dual locking stainless steel cable ties shall be rated to 537ºC maximum.
6. Dual locking stainless steel cable ties shall be low-profile, single wrap ties.
7. Dual locking stainless steel cable ties shall be available in standard and mini sizes.
8. Dual locking stainless steel cable tie standard sizes shall be rated for 250 lbs tensile strength.
9. Dual locking stainless steel cable tie standard sizes shall support maximum bundle diameters
of 2”, 4”, 6”, 8” and 10”.
10. Dual locking stainless steel cable tie mini sizes shall be rated for 100 lbs tensile strength,
11. Dual locking stainless steel cable tie mini sizes shall support maximum bundle diameters of
1”, 2”, 4”, 6” and 8”.
12. Dual locking stainless steel cable ties shall create a dual lock when installed with tool
WTA250.
13. SS series dual locking cable ties shall be UL Listed.
M. Deltec® Cable Support System (TYD series):
1. Deltec® cable support system straps and mounting head bodies shall be made of weather-
resistant acetal.
2. Deltec® cable support system locking devices shall be made from marine grade corrosion
resistant copper alloy.
3. Deltec® cable support system minimum tensile strength shall be 250 lbs.
4. Deltec® cable support system shall be designed to last a minimum of 20 years.
5. Deltec® cable support system continuous load rating shall be 20 lbs.
6. Deltec® cable support system maximum temperature rating shall be 150ºC.
7. Deltec® cable support system shall have a UL94HB flame rating.
8. Deltec® cable support system straps and mounting heads shall be black.
9. Deltec® cable support system strapping shall be available in standard lengths of 10”, 13.5”,
27”, and on reels from 50’ to 3500’.
10. Deltec® cable support system shall be installed using installation tool WT3D.
PART 3 – EXECUTION
3.01 INSTALLATION
A. Installation shall be in accordance to the NEC and CEC requirements where applicable, and the
manufacturer’s tool instructions.