User's Manual

User Manual and User Information. Ver. 0.1

Catapult Sports Ball Tracking Powerhub

User Manual and User Information

Catapult Sports Pty

75 High Street, Prahran, Victoria

Australia 3181

catapultsports.com

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL

ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND

RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE

PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST

TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE

SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE

SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE

INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE

SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CATAPULT SPORTS

REPRESENTATIVE FOR INFORMATION.

1. Intended Use

1. The purpose of this Charger is to charge equipment outfitted with the proprietary Catapult Sports

rechargeable balls. The Charger can only be used in conjunction with devices that contain the

receiving circuits for charging the native batteries of the equipment.

2. If a device that does not contain the receiver circuits no charging will ensue and the charger will

not operate.

3. Equipment outfitted with inductive receiver circuits will not charge and the charger will not

operate.

4. The charger will only operate once a receiver is placed in the charging area directly on the top of

the charger.

5. Indoor operation only - not to be used in a wet area, metal surface, or outdoors.

6. This charger is designed to specifically used for Smart football, model: B001.

2. User Operation

The charger does not contain a power switch. Simply connect the type-C USB cable end to the Charger

and the USB-C cable end to the wall adapter power supply. When not charging, the charger is in standby

mode.

Place the equipment to be charged on top of the charger. The equipment will commence charging within a

few seconds. Consult the equipment’s user manual for the time duration and procedures for charging.

PAGE 1
Catapult Sports Ball Tracking Powerhub User Manual and User Information Catapult Sports Pty 75 High Street, Prahran, Victoria Australia 3181 catapultsports.com THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
PAGE 2
3. Radio Characteristics: The WPT transmitter nominal frequency is: 917.5MHz The WPT transmitter conducted average output power is: 34.5dBm The BLE transmitter operating frequency: 2402 – 2480MHz The BLE transmitter max peak output power: -3.18dBm 4. Type-C USB Port Insert the designated cable at the USB-C port of the Powerhub charger and also into the type-C USB port of the electrical AC wall power supply adapter to connect the Powerhub Charger. 5.
PAGE 3
7. Supplier’s Declaration of Conformity FCC ID: 2ADAL-WPT1 Model: WPT1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party in the USA: Catapult Sports 181 Ballardvale Street, Wilmington, Massachusetts 01887 United States of America User Manual and User Information.