User manual
3.2.5. Charging Cube
Charging Cube with USB cable
Plug the Power supply to AC mains outlet and connect it to the USB-C socket located on the rear of
the Transmitter. LEDs on the front of the Transmitter will light up indicating the state of charge of
the battery. Blinking will indicate the charging process is ongoing. When all LEDs are steadily lit the
battery is fully charged.
Charging Cube with Wireless Charger
Plug the included Power supply to AC mains outlet and connect it to the USB-C socket on the
Wireless Charger. White LED on the Wireless Charger will turn on indicating that device is
powered. Place the Cube (securely attached inside the Cover) in its natural position to start the
charging. Always ensure there are no foreign objects located between the Cube and the surface of
the Wireless Charger.
Always use the included Power supply to power the Wireless charger. Other devices may
provide insucient amount of power which will result in long charging time.
Wireless charger emits strong electromagnetic eld which could aect the functioning of
pacemakers and other electronic implants. These could stop working or switch into test
mode, causing illness. If you wear these devices keep sucient distance to device and
warn others who wear these devices from getting too close to the device.
Wireless Charger is optimized for charging only Cube and will not charge other
electronic devices such as mobile phones. Don’t place electronic devices with the
Wireless Chargers as doing so may damage the Wireless Charger and/or the device
placed on it.
11