User manual

3.1.2. Hub connectivity
Turning on the Hub
Depending on your setup the Receiver will be powered by the included Power supply or by the
computer’s USB port. LED on the top surface will light up indicating the device is on.
Connecting the Hub to mixer, speakers or computer
For using each wireless channel separately use Balanced audio outputs Mic 1 and Mic 2.
For using Mixed audio output use Unbalanced audio output RCA OUT. Mixed audio output mixes
both wireless channels, Auxiliary-in and USB-In if the Catchbox Hub is selected as a Output device
on your computer.
For using USB digital audio output use USB Audio Out output. Plug the USB data cable to the com-
puter's USB port and on your computing device select Catchbox USB audio device as the input.
USB out mixes both wireless channels and Auxiliary in channel.
3.1.3. Hub status LED behaviour
O
Green
Amber
Amber blinking
Not powered
Power on, Transmitters paired to Hub
Power on, No transmitters connected to Hub
In pairing mode
6