Operation Manual

537001 en ma 2013

1-2 SPECIFICATIONS

Motor: 650 Watts powerful, ball bearing, ventilated within mixer enclosure.

Electrical:  100-120V, single phase

 208-240V, single phase

Switch & Timer: All in one digital control panel

Cord and Plug: 6 feet ﬂ exible cord and plug (for 110 V model only), respectively consist of 3

wires which one wire is connected for grounding, other wires are connected to

power supply

Transmission: The gears are constantly meshed in a special lubricant assuring long life;

transmission gears are of heat-treated alloy steel, High accurate construction.

All bearings are ball bearings

Speeds: The mixer has ﬁ ve positive speeds as 100 RPM – 500 RPM

Safety Guard: Safety guard is CE MODEL. Smoothly rotate open with a micro switch to shut

off power immediately to protect operator.

Dimension: LxWxH 340 x 485 x 545 mm

Net Weight: 20 Kg

Standard Attachment: Stainless steel bowl: 1 pc

Mixing hook: 1 pc

Flat beater: 1 pc

Whipping ball: 1 pc

2. INSTALLATION

BEFORE INSTALL YOUR MIXER, CHECK TO BE SURE THAT YOUR ELECTRICAL SERVICE SPECIFICATIONS

MATCH THOSE OF YOUR :MIXER AS PRINTED ON THE MIXER'S NAMEPLATE.

2-1 LOCATION

Place the mixer in its operating location. Bench should be placed on a sturdy level surface. There should be

adequate space around the mixer for the user to operate the control and install and remove bowls.

2-2 ELECTRICAL CONNECTIONS (Cord Connected Mixers)

WARNING:

THIS SUPPLY CORD ON THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG IT IS

IMPERATIVE THAI THE OUTLET TO WHICH THIS PLUG IS CONNECTED BE PROPERLY GROUNDED. IF THE

RECEPTACLE IS NOT THE PROPER GROUNDING TYPE,

AN ELECTRICIAN SHOULD BE CONTACTED.