User manual

Getting Started with Your Mobile Phone
Note:
When inserting the SIM card, ensure that the golden contact faces
downward. Card slot 1 supports WCDMA (3G) and GSM networks (this
is the only slot on single SIM devices) while card slot 2 (if applicable)
supports only GSM networks. If you want to use a SIM card supporting
WCDMA networks on your phone, insert the card in card slot 1 for
optimum network services.
Note:
When inserting the microSD card, make sure that the gold contacts
face downward.
Installing the Battery
With battery label print face up, insert the end with the metal contacts
into the bottom of the compartment, so they align with the contacts in
the phone, then lower the battery into position.
Charging the Battery
Before charging the battery, ensure that it has been properly inserted
into your phone.
1. Connect the USB cable that came with your mobile phone to the
charger.
2. Open the rubber USB port cover. Connect the USB cable to your
mobile phone, ensuring the USB symbol on the plug is face up
(assuming screen facing up).
3. Then, plug in the charger to an electrical outlet.
Note: In the event that the battery has been discharged completely
for extended periods, there may be a delay before the charging
animation displays on the screen.