User manual

9
NOTE:
• Be careful not to use excessive force when connecting the USB cable and be aware of the correct orientation of
the plug.
• Attempting to insert the connector incorrectly may cause damage that will not be covered by the warranty.
1. Plug the charger into the appropriate wall outlet.
2. When your device is fully charged, rstly unplug the USB cable from the device, then unplug the charger from the wall
outlet. Completely close the USB port cover on the device after charging
IMPORTANT INFORMATION REGARDING FUTURE USE OF
BATTERY
If the battery is completely exhausted, your device may not power on immediately after charging starts. Before attempting
to turn it on, allow the battery to charge for a few minutes. The on-screen charge animation may not be displayed during
this period.
When the battery power level is low, your device plays an alert and displays a prompt. When the battery power is almost
exhausted, your device will power off automatically.
NOTE:
The time required to charge the battery depends on the environmental temperature and the age of the battery.
POWERING YOUR DEVICE ON/OFF
POWER ON
• Press and hold the Power key.
When you turn on your device for the rst time, a Welcome Screen will be displayed. Firstly, select your preferred language
and then tap GET STARTED to continue with the set-up process.
NOTE:
• A Wi-Fi or Data connection is required.
You can skip set-up and complete it at another time. However, a Google account is required to use some of the Google
services on this Android
TM
device.
POWERING OFF
1. Press and hold the Power key to open the Power off options menu.
2. Tap Power off.