User manual

Cat
®
S50c Smartphone User Manual
5
Qi Charging
Qi is a global standard of wireless charging. This device is certified with the WPC (Wireless
Power Consortium).
Note:
The S50c wireless charging pad is sold separately.
1. Connect the USB cable to the wireless charging pad.
2. Insert the other end of the cable into the wall charger and insert into an electrical
socket.
3. Place the S50c onto the wireless charging pad.
Note:
Make sure that the area at the top of the CAT
®
logo at the back of the device is placed at
the center of the wireless charging pad as shown.
Important Information About the Battery
If the battery has not been used for a long period of time, you may not be able to power on your mobile
phone immediately after you begin charging the battery. Allow the battery to charge for a few minutes
with the phone powered off before attempting to power on the phone. The on-screen charge animation
may not be displayed during this period.
The time required to charge the battery depends on the environmental temperature and the age of the
battery.
When the battery power level is low, the phone plays an alert and displays a prompt. When the battery power
is almost exhausted, your phone will power off automatically.