User's Manual

Illustration 25 g03866141
Security Management
Connect a laptop computer with the Caterpillar ET to
the machine that will be programmed. After the
laptop computer is connected to the machine, start
the ET. Select the “Security Management” option
from “Service” menu. The “Security Management”
screen will be displayed. Refer to Illustration 25 .
Layout of the Screen
The “Security Management” screen has the following
areas:
““Current Key Information”” – The “Current Key
Information” area displays information of the key
currently in the keyswitch. If the “Description” ,
“Access Level” and “Expiration” information was not
entered for the current key, these areas will be blank.
““Display Area”” – The “Security Management”
display area has five columns: “Description” ,
“Access Level” , “Expiration” , “ID1” and “ID2” . The
information in a column can be sorted by that column.
Click on a column heading in order to sort by the
information in that column. The “Description” column
is the name for the key. The “Access Level” column
displays the access level for the key. There are two
access levels: Master and Standard. The Master
Access Level gives the user the capability to modify
information without a factory password. Standard
Access Level requires factory passwords to add
information on keys. A key can expire at a
predetermined date and time. The “Expiration”
column will show that when the key is set to expire.
Keys expire in 6 hour increments. “ID1” and “ID2” are
the unique identification numbers for the key.
Push Buttons – The following push buttons are
available in the “Security Management” screen:
“Change” , “Add” and “Delete” .
64 UENR7061
Testing and Adjusting