User's Manual

13. When the “Wireless Network Connection
Properties” screen appears:
a. Scroll down and click on “Internet
Protocol (TCP/IP)”.
b. Click “Properties”.
NOTE: Your laptop may not have as many
components as listed in the illustration.
14. Alter and record the IP Address number
by adding 10 to the third and fourth sets
of numbers of the IP address. For
example, if the number on the adapter is
172.23.1.31, the new number would be
172.23.11.41.
NOTE: The first and second sets of numbers
of the IP Address will always be 172 and 23.
The third and fourth sets of numbers in the IP
address must not be the same as any other IP
address in the local area network (LAN) or
other Wireless Communication Adapters.
Also, the numbers 0 and 255 cannot be used
for the third and fourth set of numbers. It is
highly recommended that the Network
Administrator manage all IP Addresses of
Wireless Communication Adapter modules and
PC’s configured for use with Wireless
Communication Adapters.
15. When the “Internet Protocol (TCP/IP)
Properties” screen appears:
a. Select “Use the following IP address:”.
b. Enter the altered IP Address number
from Step 14.
c. Verify that the “Subnet mask:” is
255.255.0.0.
d. Click “OK”.
16. When the “Wireless Network Connection
Properties” screen appears, click “OK”.
12