User's Manual

30. Congratulations, the installation of the PC
Card is complete. Proceed to the
Configure Cat Electronic Technician
(CatET) for the Wireless Communication
Adapter section in this manual.
Windows 2000 Operating System
In order for Cat Electronic Technician (CatET)
to operate in a wireless mode, the laptop and
CatET must both be configured. This section
provides step-by-step instructions for installing
and configuring the wireless PC Card installed
in the personal computer. Refer to the section
“Configure Cat Electronic Technician for the
Wireless Communication Adapter” for step-by-
step instructions for configuring the CatET to
communicate through the Wireless
Communication Adapter (WCA).
Required Hardware and Software
In addition to these instructions, you will need
four items in order to successfully complete
the installation and configuration.
1. A laptop with a CD drive (refer to the
“System Requirements” section in this
manual for additional information).
2. A “Proxim PC Card” and software CD (part
of the tool group).
16