Operation Manual

ManualsBrandsCateye ManualsMiscellaneousCC-GL10

How to install the

unit on your bicycle

Setting up the

computer

How to use the

computer

Others

Changing the

computer con-

ﬁguration

Uploading the mea-

surement data

Setup of your

Introduction

Features of this unit

Measurement method

This unit is a cyclocomputer, having a GPS and acceleration sensor built-in, which can per-

form measurement by receiving GPS signal, without speed sensor.

Recording and viewing the trip route

Position information from GPS is recorded with measurement data during measurement.

The measurement data such as your route and altitude can be viewed as a trip on a map on

the site, by loading them into the dedicated software application “CATEYE Sync™” on your

PC, and then uploading to the special website “CATEYE Atlas™”.

”CATEYE Atlas™” can be used as a database for your cycling life, where you can store the

trips measured using this unit or CATEYE INOU, a trip recorder with camera.

Before using the computer, please thoroughly read this manual

and keep it for future reference.

* This PDF contains a link to YouTube.

When you click on the button “Watch a video”, a message regarding secu-

rity appears.

Click the “Allow” to open a browser and play the video.

* YouTube videos and instruction manuals related to this product are subject

to change without notice.

For the latest edition of the instruction manual (PDF), visit the ofﬁcial Cat-

Eye website.

* This manual has been prepared on the assumption that the user has sufﬁ-

cient basic knowledge, including operation and terminology of PCs (Win-

dows / Mac).

CATEYE

STEALTH 10

CYCLOCOMPUTER CC-GL10

Instruction manual

ENG

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference received, including interfer-

ence that may cause undesired operation.

L’appareil est conforme à la réglementation FCC, section 15 et Industrie Canada RSS standard

exempts de licence (s). Son utilisation est soumise à deux conditions :

1. L’appareil ne doit pas provoquer d’interférences nuisibles, et

2. L’appareil doit supporter les interférences reçues, y compris les interférences empêchant son

fonctionnement correct.

Modiﬁcations

The FCC requires the user to be notiﬁed that any changes or modiﬁcations made to this device that are

not expressly approved by CatEye Co., Ltd. may void the user ’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and

receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected. Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

066601221 4

Summary of content (28 pages)

PAGE 1
Introduction Features of this unit Measurement method How to install the unit on your bicycle This unit is a cyclocomputer, having a GPS and acceleration sensor built-in, which can perform measurement by receiving GPS signal, without speed sensor. Recording and viewing the trip route ENG Changing the computer configuration * This PDF contains a link to YouTube. When you click on the button “Watch a video”, a message regarding security appears. Click the “Allow” to open a browser and play the video.
PAGE 2
Cautions when measuring GPS (Global Positioning System) is a system to identify the current position on the earth by receiving highly precise positional information sent from a satellite. Receiving the GPS signal • • • • • Charge the battery at ambient temperature between 41°F to 104°F (5°C to 40°C). Be sure to unplug the USB plug after charging is completed. Clean the USB plugs before charging. Do not apply vibration during charging.
PAGE 3
Computer Icon Battery icon Displays the remaining battery capacity in 5 levels. * For information on how to charge the battery, see “How to turn on/off the power / how to charge the battery” (page 5). Back Power button MENU button (Light up) Remaining battery capacity is large. Remaining battery capacity is small. (Flash) Pace arrow Indicates if the current speed is faster or slower than the average speed.
PAGE 4
Click the button, then a browser will open and a video will be played back. Cut the excess length of the band using scissors. Caution: Round off the cut edge of the bracket strap to prevent injury. How to install the unit on your bicycle Watch video (YouTube) Introduction How to install the unit on your bicycle * To mount the bracket to an aero-shaped handlebar or larger stem, use the optional nylon ties bracket.
PAGE 5
Power ON/OFF (press & hold) Press and hold the button on the back of the computer for 2 seconds. * Set up the computer when you turn on the power for the first time. For details, see “Setting up the computer” (on the right of this page). * When the remaining battery capacity is small, charge it according to the following instructions. * To complete the setting up quickly, press the MENU button twice after the formatting operation to stop setting up the computer.
PAGE 6
Introduction Time zone list 3 Select the time zone City code Register the setting (press & hold) Switch the display MODE MODE -10:00 -09:00 +08:00 -07:00 -06:00 -05:00 -04:00 -03:00 -02:00 -01:00 -00:00 London 0 DRW Darwin +9.5 PAR Paris +1 SYD Sydney +10 ATH Athens +2 NOU Noumea +11 MOW Moscow +3 WLG Wellington +12 THR Tehran +3.5 PPG Pago Pago -11 DXB Dubai +4 HNL Honolulu -10 KBL Kabul +4.
PAGE 7
Introduction 4 Select the daylight saving time Setting How to install the unit on your bicycle You can set the daylight saving time when you are on Daylight Saving Time. Select ON or OFF. Description ON Displays 1 hour faster than regular clock. OFF Displays in regular clock. Setting up the computer Daylight saving time icon Register the setting (press & hold) ON ↔ OFF MODE MODE How to use the computer * Change ON/OFF according to the period of daylight saving time.
PAGE 8
Measurement screen Power ON/OFF POWER Power OFF When the GPS signal receiving icon ( lights up GPS search screen When GPS signal is received Changed by operating buttons When GPS signal cannot be received MODE No operation for 10 minutes No operation for 10 minutes Current speed 0.0 (3.0) - 105.9 km/h [0.0 (2.0) - 65.
PAGE 9
Starting/Stopping measurement Backlight Dst 2 : Trip Distance-2 0.00 - 999.99 / 1000.0 - 9999.9 km [mile] MODE MODE Mx : Maximum Speed Av : Average Speed (*1) 0.0 - 105.9 km/h [0.0 - 65.9 m/h] Others 0.0 (3.0) - 105.9 km/h [0.0 (2.0) - 65.9 m/h] MODE Changing the computer configuration 0.0 - 9999.9 / 10000 - 99999 km[mile] * The night-time can be set to your needs. For information on how to set the night-time, see “Changing the computer configuration” (page 20).
PAGE 10
Introduction Holding down the MODE button with the measurement screen displayed resets the measurement data to 0 (resetting operation). All the measurement data up to that time are generated as trip data. You can view measurement results and store trip records, by uploading the trip data to the special website “CATEYE Atlas™” via the dedicated software application “CATEYE Sync™”. Resetting operation MODE MODE 2 day Trip days Trip data for the 1st day are generated.
PAGE 11
Introduction Setup of your PC At first, access the special website CATEYE Atlas™ to register as a member. Then, install CATEYE Sync™ to your PC (Windows/Mac). You can upload the trip data measured with this unit to CATEYE Atlas™, STRAVA™, TrainingPeaks™ and others, or change the computer configuration using your PC. Membership registration to CATEYE Atlas™ 1 Access CATEYE Atlas™.
PAGE 12
Enter correctly the e-mail address and password you registered at CATEYE Atlas™. How to install the unit on your bicycle After installing CATEYE Sync™, configure the login setting for CATEYE Atlas™. * When uploading the trip data only to STRAVA™ or TrainingPeaks™, the following setting is not required. 4 Click on [Account setting] and enter your e-mail address and password. 1 Start CATEYE Sync™. Double-click on the shortcut [CATEYE Sync™] to start CATEYE Sync™.
PAGE 13
The trip data generated by the resetting operation can be uploaded to the special website CATEYE Atlas™ or other services (STRAVA™ and others) in the following procedure. 4 Click on [Q Series / STEALTH]. The menu screen appears. How to install the unit on your bicycle Uploading trip data Introduction Uploading the measurement data (trip data) Save the trip data in the computer to your PC, and upload desired trip data to CATEYE Atlas™, STRAVA™, or TrainingPeaks™.
PAGE 14
When the upload is complete, the sites to which the data was uploaded are indicated in the “Status” column and links to the trip are displayed in the adjacent column. Setting up the computer Uploaded trip data How to install the unit on your bicycle Transferred trip data is displayed in the data list with a check mark. * You must have an account with the relevant site to upload data to STRAVA™ or TrainingPeaks™. Site authentication is required when uploading for the first time.
PAGE 15
3 Select the destination to save, and then click on [Open]. The file will be exported to the destination specified. How to install the unit on your bicycle You can export the trip data saved in CATEYE Sync™, and create a file. Introduction Exporting the trip data 1 Check any trip data on the data list screen, and then click on [Export]. A dialog for selecting the file format appears. Setting up the computer * Selecting data for multiple trips lets you export several files at once.
PAGE 16
Introduction 3 Select the file you want to load, and then click on [Open]. Trip data How to install the unit on your bicycle Data contained in the trip data Date and clock (date/time when the measurement started) Elapsed time Description Setting up the computer Compatible files Data recorded at the record interval specified • Location information • Trip distance • Sea level altitude • Current speed e-Train Data™Ver.3/4 file .csv e-Train Data™Ver.2 file Record interval and capacity limit .
PAGE 17
Introduction 4 Click on the trip uploaded. A map with the trip route with ride data shown. How to install the unit on your bicycle Reviewing, editing and sharing the trip (What you can do with CATEYE Atlas™) You can share the trip with your friends and other users, by editing the trip information uploaded to CATEYE Atlas™. 1 Access CATEYE Atlas™. Access the website “CATEYE Atlas™” from your browser (http://www.cateyeatlas.com).
PAGE 18
Deleting the GPS point You can delete particular GPS points on the route. How to install the unit on your bicycle Select the disclosure setting. • Private : Can be viewed only with your account. • Public : All users can view. • Friends only : Only your friends can view. Introduction 6 Select the privacy setting. 1 Click on [Delete GPS point] from the trip information editing screen. The trip route appears on the map.
PAGE 19
Introduction Exporting to a GPX fil How to install the unit on your bicycle Export a general-purpose GPS data file from the trip. This can be used with other services, including Google Earth™. 1 Click on [GPX export] on the trip information editing screen. A confirmation message appears. Setting up the computer How to use the computer Setup of your PC 2 Click on [Export]. A GPX file is downloaded.
PAGE 20
4 Click on [Q Series / STEALTH]. The menu screen appears. How to install the unit on your bicycle You can change the computer configuration in two ways. • Changing the setting with CATEYE Sync™ (below on this page) You can change the configuration easily from your PC application, with the computer connected to your PC with the cradle. Introduction Changing the computer configuration • Changing the settings of the computer alone (page 22). This can be used when changing the setting with not using a PC.
PAGE 21
Setting items Description Tire circumference This is not used with this unit. How to install the unit on your bicycle Before changing the settings, click on [Read] to load the settings of the computer. Introduction 6 Click on [STEALTH] to change the settings. Read the current settings of the computer. Change the settings according to the following procedure. Time zone Description Select the city code nearest from your current location. * For details, see “Time zone list” (page 6).
PAGE 22
From “Selecting the speed unit” (page 25) Clock setting Change the settings of the time zone, daylight saving time, and the clock display format. * With this unit, it is not necessary to set the clock/date, since they are synchronized after receiving GPS signal. Menu top screen Time zone list Select the code for the city nearest from your current location.
PAGE 23
Time zone list City code Example: Change the time zone LON NYC (New York) Previous setting TYO (Tokyo) Register the setting Every menu top screen MENU The time zone is changed from NYC (New York) to TYO (Tokyo) of the previous setting. Change the time zone again Current setting TYO (Tokyo) Shortcut Register the setting MENU 0 DRW Darwin +9.5 PAR Paris +1 SYD Sydney +10 ATH Athens +2 NOU Noumea +11 MOW Moscow +3 WLG Wellington +12 THR Tehran +3.
PAGE 24
From “Night-time setting” Setting the record interval Set the time when the backlight lights up. * When you do not want to turn on the backlight throughout the day, set the start time and end time to the same hour. Set the second-scale interval to record the measurement data. * The maximum recording time / maximum time for one trip that can be recorded in the computer depends on the selected interval.
PAGE 25
Selecting the speed unit Select the speed unit (km/h or m/h). km/h ↔ m/h MODE MODE MODE Register the setting Press the AC button on the back of the computer. All screen items will light up for 2 seconds, and the unit will change to the GPS search screen. Setting up the computer (press & hold) Restarting operation AC GPS search screen Data to be stored / data to be deleted Data to be stored Setup of your PC Data to be stored / deleted upon the restarting operation are as follows.
PAGE 26
Introduction Troubleshooting The following troubles are not due to failure. See also “FAQ” in CATEYE Atlas™ (web) (http://www.cateyeatlas.com/qa/). The power is turned off while riding. Trouble The measurement data is wrong. – Remaining battery capacity is nearly zero. Charge the computer according to the procedure in “How to charge” (page 5). MEM FULL flashes. – The power is turned off automatically in 10 minutes without GPS signal received.
PAGE 27
Maintenance To clean the computer or accessories, use diluted neutral detergent on a soft cloth, and wipe it off with a dry cloth. Current speed 0.0 (3.0) - 105.9 km/h [0.0 (2.0) - 65.9 m/h] Middle display Clock 0:00 - 23:59 [AM1:00 - PM12:59] (Both 12 and 24-hour modes can be selected) (Automatic adjustment using GPS) Elapsed Time 0:00’00” - 9:59’59” Trip Distance 0.00 - 999.99 km [mile] Trip Distance-2 0.00 - 999.99 / 1000.0 - 9999.9 km [mile] Average Speed 0.0 - 105.9 km/h [0.0 - 65.
PAGE 28
Introduction Limited warranty 2-year Warranty: Computer only How to install the unit on your bicycle (Deterioration of the battery is excluded.) CatEye cycle computers are warranted to be free of defects from materials and workmanship for a period of two years from original purchase. If the product fails to work due to normal use, CatEye will repair or replace the defect at no charge. Service must be performed by CatEye or an authorized retailer.