Operation Manual

38
Introduction
How to install the
unit on your bicycle
Setting up the
computer
How to use the
computer
Setup of your PC
Uploading the
measurement data
Others
Changing the
computer
configuration
Night-time setting
Set the time when the backlight lights up.
* When you do not want to turn on the backlight throughout the
day, set the start time and end time to the same hour.
Start time
Enter the start time when the backlight
lights up.
MODE
Increase the value
End time
Enter the end time when the backlight
lights off.
MODE
Increase the value
MODE
MODE
MODE
MENU
(Press & hold)
(Press & hold)
From “Night-time setting”
Setting the record interval
Set the second-scale interval to record the measurement data.
* The maximum recording time / maximum time for one trip that
can be recorded in the computer depends on the selected interval.
Record
interval
Maximum re-
cording time
(total time of all
trip data)
Maximum time
for one trip
1-S
(1 second)
35 hours 12 hours
2-S
(2 seconds)
70 hours 24 hours
5-S
(5 seconds)
175 hours 60 hours
MODE
1-S 2-S 5-S
MODE
MENU
(Press & hold)
(Press & hold)
(Press & hold)
Changing
the settings
Changing
the settings
Changing
the settings
MODE
ON
↔
OFF
MODE
Dst Dst2
Odo ALT Mx Av
(Press & hold)
MODE
MENU
Setting function display
You can hide undesired functions.
* It is not possible to hide elapsed time (Tm).
* Measurement is performed for hidden functions. When a hidden
function is displayed again, its measurement results will be reflected.
MODE
MODE
MODE
From “Pairing the sensor” (page 36)
To “Setting the record interval”
Register
the setting
Register
the setting
Register
the setting
To “Setting the middle display” (page 39)