Operation Manual

ManualsBrandsCateye ManualsMiscellaneousCC-RD430DW Strada

CC-RD430DW ENG

Before using the computer, please thoroughly read

this manual and keep it for future reference.

Please visit our website, where detailed instruc-

tions with movies are available and the instruction

manual can be downloaded.

The sensor ID was synchronized with this unit before ship-

ment. It is not necessary to synchronize the sensor ID.

Warning / Caution

• Pacemakerusersshouldneverusethisdevice.

• Donotconcentrateonthecomputerwhileriding.Ridesafely!

• Installthemagnet,sensor,andbracketsecurely.Checktheseperi-

odically.

• Ifachildswallowsabattery,consultadoctorimmediately.

• Donotleavethecomputerindirectsunlightforalongperiodof

time.

•

Donotdisassemblethecomputer.

• Donotdropthecomputertoavoidmalfunctionordamage.

• Whenusingthecomputerinstalledonthebracket,changethe

MODEbypressingonthethreedotsbelowthescreen.Pressing

hardonotherareascanresultinmalfunctionordamagetothe

computer.

•

BesuretotightenthedialoftheFlexTight™bracketbyhand.Tight-

eningitstronglyusingatool,etc.maydamagethescrewthread.

• StopusingtheunitifyouhaveskinirritationwiththeHRstrapor

electrodepad.

• DonottwistorpullstronglytheHRstrap.

• TheHRstrapmaydeteriorateduetolong-termuse.ReplacetheHR

strapifithasfrequentmeasurementerrors.

• Whencleaningthecomputer,bracketandsensor,donotusethin-

ners,benzene,oralcohol.

• Disposeofusedbatteriesaccordingtolocalregulations.

• LCDscreenmaybedistortedwhenviewedthroughpolarizedsun-

glasslenses.

2.4GHz digital wireless system

Eachsensoradoptsthe2.4GHzdigitalwirelesstechnology,whichis

usedforwirelessLAN,etc.Thistechnologypracticallyeliminatesin-

terferencefromanyexternalnoiseandcross-talkwithotherwireless

computerusersduringmeasurement,andenablesittorecordand

storehighlyreliabledata.However,itsuffersinterferenceinthefol-

lowingplacesand/orenvironments,whichmayresultinanincorrect

measurement.

*

Carefulattentionisrequiredespeciallywhilecheckingthesensor

ID.

•

TV,PC,radios,motors/engines,orincarsandtrains.

• Railroadcrossingsandnearrailwaytracks,aroundtelevisiontrans-

mittingstationsandradarbases.

• Otherwirelesscomputersordigitallycontrolledlights.

• IntheWi-Fienvironment

Automatic recognition of the speed sensor ID

ThespeedsensorhasitsownID,andthecomputermeasuresinsyn-

chronizationwiththeID.

Twospeed-sensorIDscanberegisteredtoonecomputer,whichcan

automaticallyidentifytwospeedsensorsoncetheirIDsareregistered

inadvance.

AsatirecircumferenceissettothespeedsensorID,wheelselection

bymanualoperationisnolongerrequired,whichwasnecessarywith

conventionalunits.

*Thespeedsensorcurrentlyrecognizedisindicatedwithasensor

icon( or )onthescreen.

Procedure of automatic recognition

Whenthecomputerchangestothepowersavingscreen,andthenre-

turnstothemeasurementscreen,automaticrecognitionofthespeed

sensorIDisperformedinthefollowingprocedure.

ThecomputersearchesthespeedsensorIDsignal,whichhad

beensynchronizedimmediatelybefore.

Oncethesensorsignalisreceived,thesensoriconforthespeed

sensorlightsup,andthecomputerstartsthemeasurement.

WhenthespeedsensorIDsignalwhichhadbeensynchronizedimme-

diatelybefore,cannotbereceivedanothersensorsignalissearched.

Whenthecomputerreceivesanothersensorsignal,thesensoriconfor

theothersensorlightsuponthescreen,andstartsthemeasurement.



WhenanotherspeedsensorIDsignalcannotbereceived,the

originalsensorsignalissearchedagain.

Thecomputerrepeatssynchronizationthroughtheproceduredescribed

aboveevenifitfailsinsynchronizationforsomereason,suchascom-

municationfailure;insuchcaseshowever,ittakestimeforrecognition.

*Whenthecomputerdoesnotreceiveanysignalfromthesensorfor

10minutes,itwillchangetothepower-savingscreen.Whensucha

conditionlastsanother1hour,itwillgetintothesleepstate.

Switching the ID by manual operation

ThespeedsensorIDcanbeforcedtochangemanually,accordingto

themenuscreen“Settingthetirecircumference”.Usethisoperation

inthefollowingcases.

• Whenthecomputercannotrecognizetheintendedsensorsignal,

sincethe2registeredspeedsensorsarenearbyandbotharesend-

ingasensorsignal.

• WhenyouwanttoswitchthespeedsensorIDimmediately.

*OnceyouswitchthespeedsensorIDbymanualoperation,thecom-

putercontinuestosearchonlythespeedsensorIDyouswitched

whenreturningtothemeasurementscreen.Whenthecomputer

cannotreceiveanysensorsignalin10minutes,thepower-saving

modeisactivated,andthecomputerchangestothepowersaving

screen.Thecomputersearchesthroughtheprocedureofautomatic

recognitionwhenitreturnstothemeasurementscreen.

CATEYE STRADA

DIGITAL WIRELESS

CYCLOCOMPUTER

CC-RD430DW

Summary of content (10 pages)

PAGE 1
CC-RD430DW ENG 1 CATEYE STRADA DIGITAL WIRELESS CYCLOCOMPUTER CC-RD430DW Before using the computer, please thoroughly read this manual and keep it for future reference. Please visit our website, where detailed instructions with movies are available and the instruction manual can be downloaded. The sensor ID was synchronized with this unit before shipment. It is not necessary to synchronize the sensor ID.
PAGE 2
CC-RD430DW ENG 2 How to install the unit on your bicycle 1 Attach the bracket to the stem or handlebar The FlexTight™ bracket can be attached to either the stem or the handlebar, depending on how the bracket fits into the bracket band. Caution Be sure to tighten the dial of the FlexTight™ bracket by hand. Tightening it strongly using a tool, etc. may damage the screw thread.
PAGE 3
CC-RD430DW ENG 3 How to install the unit on your bicycle 2 Mount the speed sensor and magnet Install the sensor and magnet Speed sensor Sensor screw Cadence magnet Wheel magnet Speed sensor SENSOR ZONE Sensor rubber pad Loosen SENSOR ZONE SENSOR ZONE 3 mm Wheel magnet Cadence magnet 2 3 mm * The wheel magnet may be installed anywhere on the spoke if the above installation conditions are satisfied.
PAGE 4
CC-RD430DW ENG 4 Heart rate sensor Before wearing the heart rate sensor Warning: Pace maker users should never use this device. • Stop using the unit if you have skin irritation with the HR strap or electrode pad. • Do not twist or pull strongly the HR strap. • The HR strap may deteriorate due to long-term use. Replace the HR strap if it has frequent measurement errors. Wearing the heart rate sensor * Adjust the HR strap length to fit your chest size (underbust).
PAGE 5
CC-RD430DW ENG 5 Preparing the computer Perform the following formatting operation, when you use the unit for the first time or restore the unit to the condition before shipment. 1 Format (initialize) Press the MENU button on the back of the computer and the AC button simultaneously. AC Battery case cover Tire circumference MENU AC MENU 2 Select the speed unit Select “km/h” or “mph”.
PAGE 6
CC-RD430DW ENG 6 Operating the computer [Measuring screen] Current speed 0.0 (4.0) – 105.9 km/h [0.0 (3.0) – 65.9 mph] * “S” icon is displayed when displaying current speed at the bottom. Speed sensor signal icon It flashes in synch with a speed sensor signal. Pace arrow Indicates if the current speed is faster or slower than the average speed.
PAGE 7
CC-RD430DW ENG 7 Changing the computer settings [Menu screen] Pressing MENU on the measurement screen changes to the menu screen. Various settings can be changed on the menu screen. * After changes are made, be sure to register the setting(s) by pressing the MENU button. * Leaving the menu screen without any operation for 1 minutes returns to the measurement screen, and changes are not saved. From “Selecting the measurement unit” Setting the upper display Select the function for the upper display.
PAGE 8
CC-RD430DW ENG 8 Changing the computer settings [Menu screen] From “Setting the tire circumference” From “Setting the clock” Searching for sensor ID Entering the total distance Search the heart rate and speed sensor IDs. * The sensor ID was synchronized with this unit before shipment. Search the sensor ID only when a new sensor is used. Enter the total distance. Once you enter any value to the total distance, you can start from the value you entered.
PAGE 9
CC-RD430DW ENG 9 In use Heart rate sensor Troubleshooting • To clean the computer or accessories, use diluted neutral detergent on a soft cloth, and wipe it off with a dry cloth. • Since the HR strap directly touches your skin, keep it clean by washing off any dirt after use. * When the heart rate flashes, replace the battery. Insert new lithium batteries (CR2032) with the (+) sign upward, and close the battery cover firmly. The current speed / heart rate cannot be measured.
PAGE 10
CC-RD430DW ENG 10 In use Specification Spare accessories CR2032 x 1 / Approx. 6 months (When using 1 hour/day) Battery CR2032 x 1 / Approx. 1 year Heart rate / Battery life sensor : (When worn about 1 hour per day) CR2032 x 1 / Approx. 1 year Speed sensor : (When using 1 hour/day) * The factory-loaded battery life might be shorter than the above-mentioned specification.