START Click the button and follow the instructions.
Thank you for purchasing our cyclocomputer CATEYE V2c/V3. This Quick Start Manual explains how to set up the computer, how to install the unit to your bicycle, and how to wear the heart rate sensor. Please set up the unit according to the specified procedure, then it will be ready for use as a cyclocomputer. ••Before use, read the instruction manual that comes with the product thoroughly to the end to understand the functions of this unit, and to use it safely in a correct manner.
This PDF contains a movie file. When you click on the movie screen, a message regarding security appears. Click the “Trust in the text” or “Play” button to close the message. Click the screen again to play the movie.
CATEYE V2c / V3 Quick Start Manual Return to a Cover Click the item you wish to view.
Operation of buttons Set up the computer by operating the buttons as follows. Check the button position before you start setting up. Front Back M1/+ MENU SSE M2/- Press the SSE button, the M1/+ button, and the M2/- button on the front of the computer. Press the MENU button on the back of the computer.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Setting the year Setting up the computer Preparation for setting up Close Restarting operation Setting the date display Return to Contents Open Insulation sheet Open the battery cover on the back of the computer using a coin, and then pull out the insulation sheet. * After pulling out, replace the battery cover as before.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Setting up the computer Restarting operation Restarting operation Press the AC button on the back of the computer. After full lighting of the screen, the computer changes to the date display setting screen to start setting up.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Setting up the computer Setting the date display Restarting operation When the M1/+ button or the M2/- button is pressed, either “YY/MM/DD”, “MM/DD/YY” or “DD/MM/YY” is selected for the date display. Select the display of your choice. After selecting, press the SSE button to proceed to the next step “Setting the year”. * The following description is for the case when “YY/MM/DD” is selected.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Return to Contents Setting up the computer Setting the year Restarting operation Pressing the M1/+ button increases the value (“Year” of the date) flashing, and pressing the M2/- button decreases it. Enter any value. After entering, press the SSE button to proceed to the next step “Setting the month”.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Return to Contents Setting up the computer Setting the month Restarting operation Pressing the M1/+ button increases the value (“Month” of the date) flashing, and pressing the M2/- button decreases it. Enter any value. After entering, press the SSE button to proceed to the next step “Setting the day”.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Return to Contents Setting up the computer Setting the day Restarting operation Pressing the M1/+ button increases the value (“Day” of the date) flashing, and pressing the M2/- button decreases it. Enter any value. After entering, press the SSE button to proceed to the next step “Setting the clock display”.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Return to Contents Setting up the computer Setting the clock display Restarting operation When the M1/+ button or the M2/- button is pressed, either “12h” or “24h” is selected for the clock display. Select the display of your choice. After selecting, press the SSE button to proceed to the next step “Setting the hour”.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Return to Contents Setting up the computer Setting the hour Restarting operation Pressing the M1/+ button increases the value (“Hour” of the clock) flashing, and pressing the M2/- button decreases it. Enter any value. After entering, press the SSE button to proceed to the next step “Setting the minute”.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Setting up the computer Setting the minute Restarting operation Pressing the M1/+ button increases the value (“Minute” of the clock) flashing, and pressing the M2/- button decreases it. Enter any value. After entering, press the MENU button to change to the Measuring screen, and then proceed to the next step “Setting the wheel”.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Restarting operation Setting the date display Return to Contents Setting up the computer Setting the wheel Press the MENU button to change to the FILE VIEW screen. Press the M2/- button twice to change to the WHEEL setting screen, and press the SSE button to proceed to “Setting the wheel (1/3)”.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Return to Contents Setting up the computer Setting the wheel Restarting operation When “A” flashes after changing to the WHEEL setting screen, press the SSE button to proceed to the next step “Setting the wheel (2/3)”.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Enter the tire circumference (mm) of your bicycle with 4 digits using the tire circumference reference table. Pressing the M1/+ button increases the value flashing, and pressing the M2/- button decreases it. Pressing the SSE button moves to the next two digits. After entering, press the MENU button to proceed to the next step “Setting the speed unit”.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Restarting operation Setting the date display Return to Contents Setting up the computer Setting the speed unit Press the M2/- button twice to change to the UNIT setting screen, and press the SSE button to proceed to “Setting the measurement unit”.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Return to Contents Setting up the computer Setting the speed unit Restarting operation When the M1/+ button or the M2/- button is pressed, either “km” or “mile” is selected for the measurement unit. Select the display of your choice. After selecting, press the MENU button twice to return to the measuring screen.
CATEYE V2c / V3 Quick Start Manual Preparation for setting up Return to Contents Setting up the computer Now, setup of the computer is completed. Restarting operation If the bracket and speed sensor are not installed on your bicycle, return to Contents, click the movies of how to install the bracket and speed sensor, and install them according to the instructions. When V3 (TR300TW) is used, see also “How to wear the heart rate sensor (movie)”.
CATEYE V2c / V3 Quick Start Manual Return to Contents How to install the bracket
CATEYE V2c / V3 Quick Start Manual Return to Contents How to install the speed sensor
CATEYE V2c / V3 Quick Start Manual Return to Contents How to wear the heart rate sensor
CATEYE V2c / V3 Quick Start Manual Return to Contents Setting up the computer Tire circumference reference table ETRTO Tire size 47-203 54-203 40-254 47-254 40-305 47-305 54-305 28-349 37-349 32-369 40-355 47-355 32-406 35-406 12x1.75 12x1.95 14x1.50 14x1.75 16x1.50 16x1.75 16x2.00 16x1-1/8 16x1-3/8 17x1-1/4 (369) 18x1.50 18x1.75 20x1.25 20x1.
