START Click the button and follow the instructions.
Thank you for purchasing our cyclocomputer CATEYE ADVENTURE. This Quick Start Manual explains how to set up the computer and how to install the unit on your bicycle. Please set up the unit according to the specified procedure, then it will be ready for use as a cyclocomputer. Before use, read the instruction manual that comes with the product thoroughly to the end to understand the functions of this unit, and to use it safely in a correct manner.
This PDF contains a movie file. When you click on the movie screen, a message regarding security appears. Click the “Trust in the text” or “Play” button to close the message. Click the screen again to play the movie.
CATEYE ADVENTURE Quick Start Manual Return to a Cover Click the item you wish to view.
Operation of buttons Set up the computer by operating the buttons as follows. Check the button position before you start setting up. SSE + MODE MODE Click Click Click Press the MODE button on the back of the computer. Next Press the SSE button on the face of the computer and the MODE button on the back simultaneously.
CATEYE ADVENTURE Quick Start Manual Formatting operation MENU Setting the speed unit Setting the temperature unit AC Entering the tire circumference Return to Contents Setting up the computer Formatting operation Press the MENU button on the back of the computer and the AC button simultaneously. * Press and hold the MENU button until you release the AC button. After full lighting of the screen, the computer switches to the speed unit setting screen to start setup.
CATEYE ADVENTURE Quick Start Manual Formatting operation Setting up the computer Setting the speed unit When the MODE button is pressed, either “km/h” or “mph” is selected for the speed unit display. Select the display of your choice. After selecting, press the SSE button and the MODE button simultaneously to proceed to the next step “Setting the temperature unit”.
CATEYE ADVENTURE Quick Start Manual Formatting operation Return to Contents Setting up the computer Setting the temperature unit When the MODE button is pressed, either “°C” (Celsius) or “°F” (Fahrenheit) is selected for the temperature unit display. Select the display of your choice. After selecting, press the MENU button to proceed to the next step “Entering the tire circumference”.
CATEYE ADVENTURE Quick Start Manual Formatting operation Enter the tire circumference (mm) of your bicycle with 4 digits using the tire circumference reference table. Pressing the MODE button increases the value flashing, and pressing the SSE button and the MODE button simultaneously moves to the next digit. After entering, press the MENU button to proceed to the next step “Searching the sensor ID”.
CATEYE ADVENTURE Quick Start Manual Formatting operation Return to Contents Setting up the computer Searching the sensor ID Keep the computer 30 cm (12”) away from the sensor, and press and hold the RESET button of the sensor. * A sensor ID signal is sent when you release the RESET button after pressing and holding it.
CATEYE ADVENTURE Quick Start Manual Formatting operation Return to Contents Setting up the computer Searching the sensor ID When the computer receives the ID signal from the sensor successfully, it displays the ID number, then proceeds directly to the setting clock display screen.
CATEYE ADVENTURE Quick Start Manual Formatting operation Setting up the computer Setting the clock display When the MODE button is pressed, either “12h” or “24h” is selected for the clock display. Select the display of your choice. After selecting, press the SSE button and the MODE button simultaneously to proceed to the next step “Setting the hour”.
CATEYE ADVENTURE Quick Start Manual Formatting operation Return to Contents Setting up the computer Setting the hour Pressing the MODE button increases the value flashing (“Hour” of the clock). Enter any value. After entering, press the SSE button and the MODE button simultaneously to proceed to the next step “Setting the minute”.
CATEYE ADVENTURE Quick Start Manual Formatting operation Return to Contents Setting up the computer Setting the minute Pressing the MODE button increases the value flashing (“Minute” of the clock). Enter any value (Pressing and holding MODE rapidly increases the value.). After entering, press the MENU button to switch to the measuring screen.
CATEYE ADVENTURE Quick Start Manual Formatting operation Return to Contents Setting up the computer Now, setup of the computer is completed. Setting the speed unit If the bracket and speed sensor are not installed to your bicycle, return to Contents, click the movies of how to install the bracket and speed sensor, and install them according to the instructions.
Operation of buttons The sea level altitude is corrected by operation of buttons as follows. * “Sea level altitude correction” describes the case when the computer is installed on the bracket. Operation of the MODE button Operation of the SSE + MODE buttons Click Click Click Press around the dots on the face of the computer, without touching the SSE button. Press the SSE button along with the face of the computer.
CATEYE ADVENTURE Quick Start Manual Selecting the correction method Entering the sea level altitude Applying the sea level altitude Return to Contents Sea level altitude correction This unit determines the altitude by converting the change in atmospheric pressure and temperature, therefore it may cause deviation from the actual sea level altitude depending on the ever-changing atmospheric pressure and temperature. It is recommended to correct the sea level altitude just before measurement. 1.
CATEYE ADVENTURE Quick Start Manual Selecting the correction method Entering the sea level altitude Return to Contents Sea level altitude correction The following two methods can be used for the sea level altitude correction. • ADJUST (Sea level altitude correction) Enter the altitude at the current point. Enter the actual value at the point where the sea level altitude is known, such as the altitude along the seashore, or at a triangulation point sign, etc.
CATEYE ADVENTURE Quick Start Manual Return to Contents Sea level altitude correction Selecting the correction method Selecting the correction method (1/2) When the MODE button is pressed, either “ADJUST” or “HOME” is selected. Select the correction method of your choice.
CATEYE ADVENTURE Quick Start Manual Return to Contents Sea level altitude correction Selecting the correction method Selecting the correction method (2/2) After selecting, press the SSE button and the MODE button simultaneously to proceed to the next step “Entering the sea level altitude”.
CATEYE ADVENTURE Quick Start Manual Sea level altitude correction Entering the sea level altitude Selecting the correction method When the MODE button is pressed, “+” or “-” is selected. Select either the positive or negative symbol for the value you wish to set. * Select “-” when the sea level altitude is below 0 m. After selecting, press the SSE button and the MODE button simultaneously to proceed to the next step “Entering the sea level altitude (2/2)”.
CATEYE ADVENTURE Quick Start Manual Sea level altitude correction Entering the sea level altitude Selecting the correction method Enter the sea level altitude (a value with 4 digits) of the current point. Pressing the MODE button increases the value flashing, and pressing the SSE button and the MODE button simultaneously moves to the next digit.
CATEYE ADVENTURE Quick Start Manual Sea level altitude correction Applying the sea level altitude Selecting the correction method Once the value you wish to set is displayed, press and hold the MODE button to return to the measuring screen. The altitude you set is applied to the sea level altitude on the measuring screen, and the sea level altitude correction is completed.
CATEYE ADVENTURE Quick Start Manual Return to Contents Sea level altitude correction Selecting the correction method Selecting the correction method (2/2) To set a new home altitude, press the SSE button and the MODE button simultaneously to proceed to the next step “Entering the home altitude”.
CATEYE ADVENTURE Quick Start Manual Return to Contents Sea level altitude correction Entering the home altitude Selecting the correction method When the MODE button is pressed, “+” or “-” is selected. Select either the positive or negative symbol for the value you wish to set. * Select “-” when the sea level altitude is below 0 m. After selecting, press the SSE button and the MODE button simultaneously to proceed to the next step “Entering the home altitude (2/2)”.
CATEYE ADVENTURE Quick Start Manual Return to Contents Sea level altitude correction Entering the home altitude Selecting the correction method Enter the sea level altitude (a value with 4 digits) you wish to set as a home altitude, such as the altitude of your home. Pressing the MODE button increases the value flashing, and pressing the SSE button and the MODE button simultaneously moves to the next digit.
CATEYE ADVENTURE Quick Start Manual Sea level altitude correction Applying the home altitude Selecting the correction method Once the value you wish to set is displayed, press and hold the MODE button to return to the measuring screen. The altitude you set is applied to the home altitude on the measuring screen, and the sea level altitude correction is completed.
CATEYE ADVENTURE Quick Start Manual Return to Contents Sea level altitude correction Applying the home altitude Selecting the correction method Press and hold of the MODE button to return to the measuring screen. The altitude you set is applied to the home altitude on the measuring screen, and the sea level altitude correction is completed.
CATEYE ADVENTURE Quick Start Manual Return to Contents How to install the bracket
CATEYE ADVENTURE Quick Start Manual Return to Contents How to install the speed sensor
CATEYE ADVENTURE Quick Start Manual Return to Contents Setting up the computer Tire circumference reference table ETRTO 47-203 54-203 40-254 47-254 40-305 47-305 54-305 28-349 37-349 32-369 40-355 47-355 32-406 35-406 Tire size 12x1.75 12x1.95 14x1.50 14x1.75 16x1.50 16x1.75 16x2.00 16x1-1/8 16x1-3/8 17x1-1/4 (369) 18x1.50 18x1.75 20x1.25 20x1.
