User Manual

ENG-13
ENG
Tire circumference
You can find the tire circumference (L) of your tire size in the chart below, or actually
measure the tire circumference (L) of your bicycle.
Continue
Tire size L (mm) Tire size L (mm) Tire size L (mm)
12 x 1.75
14 x 1.50
14 x 1.75
16 x 1.50
16 x 1.75
18 x 1.50
18 x 1.75
20 x 1.75
20 x 1-3/8
22 x 1-3/8
22 x 1-1/2
24 x 1
24 x 3/4
Tubular
24 x 1-1/8
24 x 1-1/4
24 x 1.75
24 x 2.00
24 x 2.125
26 x 7/8
935
1020
1055
1185
1195
1340
1350
1515
1615
1770
1785
1753
1785
1795
1905
1890
1925
1965
1920
26 x 1
(
59
)
26 x 1
(
65
)
26 x 1.25
26 x 1-1/8
26 x 1-3/8
26 x 1-1/2
26 x 1.40
26 x 1.50
26 x 1.75
26 x 1.95
26 x 2.00
26 x 2.10
26 x 2.125
26 x 2.35
26 x 3.00
27 x 1
27 x 1-1/8
27 x 1-1/4
27 x 1-3/8
1913
1952
1953
1970
2068
2100
2005
2010
2023
2050
2055
2068
2070
2083
2170
2145
2155
2161
2169
650 x 20C
650 x 23C
650 x 35A
650 x 38A
650 x 38B
700 x 18C
700 x 19C
700 x 20C
700 x 23C
700 x 25C
700 x 28C
700 x 30C
700 x 32C
700C Tubular
700 x 35C
700 x 38C
700 x 40C
29 x 2.1
29 x 2.3
1938
1944
2090
2125
2105
2070
2080
2086
2096
2105
2136
2146
2155
2130
2168
2180
2200
2288
2326
L mm
4. Set the sensor ID
Set the heart rate sensor ID and the speed sensor ID.
* This unit requires the sensor ID in order for the computer to receive signal from
the sensors.
* To check the sensor ID, heart rate sensor must be worn properly (page 9), and be
within 5 m from the bicycle with a speed sensor mounted (page 7).
* When performing ID Synch, make sure there is no other similar sensors in the
surrounding area. (It may pick up other sensor's ID)
1. Wear the heart rate sensor.
2. Press the SSE button to start searching for the heart rate
sensor ID.
When the heart rate is displayed as “ID-OK” on the screen,
searching is completed.
Start searching:
SSE
How to measure the tire circumference (L)
For the most accurate measurement, do a wheel roll out. With the tires
under proper pressure, place the valve stem at the bottom. Mark the
spot on the floor and with the rider's weight on the bike, roll exactly one
wheel revolution in a straight line (until the valve comes around again to the bottom). Mark
where the valve stem is and measure the distance in millimeter.
* For your reference, use the tire circumference chart below.