User Manual

ENG-39
ENG
Fluctuation in the heart
rate indicator, for ex-
ample it returns to zero
and then the heart rate
is measured again.
Is the electrode pad being
worn correctly?
To wear the electrode pad correctly, fol-
low the instructions for wearing the
heart rate sensor (page 9).
Moving the main unit
away from your body
will prevent measure-
ment of the heart rate.
Check whether
lights
up on the computer screen.
The remaining battery capac-
ity for the computer is low.
Replace it with a new battery (CR2032).
After replacement, be sure to perform
the restarting operation (page 11).
Is the battery for the heart
rate sensor used up?
Replace it with a new battery (CR2032).
Pressing the LT button
does not turn on a light.
Check whether
lights
up on the computer screen.
The remaining battery capac-
ity for the computer is low.
Replace it with a new battery (CR2032).
After replacement, be sure to perform
the restarting operation (page 11).
Trouble Check Items Remedy
Heart rate signals are
not received.
Have you checked the sensor
ID? Is the computer ID Synch'ed
with somebody else's sensor?
Is the Heart rate sensor
icon off
?
Has the power-saving func-
tion been activated, show-
ing only date/clock on the
screen?
Is the heart rate sensor at-
tached securely to your
body?
Dry skin (particularly in
winter)
Is the battery for the heart
rate sensor used up?
Check whether
lights
up on the computer screen.
The remaining battery capac-
ity for the computer is low.
Is the electrode pad overly
worn and damaged after
long use?
Check the speed sensor ID (page 29)
for Hr (heart rate sensor).
If the Heart rate sensor icon is off
,
the computer cannot receive the Heart
rate data. Press the M1/+ or M2/- but-
ton once to turn on the icon.
Press any button on the computer to
cancel the power-saving function.
Adjust the electrode pad with its rub-
ber surface to have a good contact with
the body.
Slightly moisten the electrode pad of
the heart rate sensor.
Replace it with a new battery (CR2032).
Replace it with a new battery (CR2032).
After replacement, be sure to perform
the restarting operation (page 11).
Replace it with a new heart rate sen-
sor.
Continue