User Manual

ENG-24
2
3
4
1
6
5
8
7
9
9
0
0
q
q
SSE
2. Select the file using the M1/+ and M2/- buttons, and confirm
with the SSE button.
Switching the file number:
M1/+
M2/-
3. Scroll through the data saved in each file by pressing the
SSE button.
The display items are as follows.
(or)
Various average
values
Various maximum
values Out of the target zone
(Displayed
alternately)
When the CDC target
zone is set to OFF
*2
Time of
the start
File number
Number of laps
used in a file
Date of file
creation
1 Average speed
2 Average cadence
3 Trip distance
4 Elapsed time
5 Maximum speed
6 Maximum cadence
7 Upper zone limit
8 Lower zone limit
9 Time in the zone, and the percentage
0 Time above the zone, and the percentage
q Time blow the zone, and the percentage
In the target zone
4. Pressing the MENU button returns to the menu top screen
(FILE VIEW screen). Pressing it again returns to the
measurement screen.
To the menu top/measurement screen:
MENU
*2: CDC target zone is set to OFF during measurement, no data related to the target
zone is displayed.
* Pressing the LAP button while viewing some data switches to viewing the lap
data (page 25).
(Back)
SSE SSE SSE
SSE