Specifications

iv
the keyswitch isin the STANDBYposition. The keycannot be
removed from thecontroller when itis in theclockwise (RUN)
position.
• Tocompletelyshutoffpowertotheunit,turnthekeyswitch
anti-clockwise (STANDBY position), switch the mains power
switch at rear of unit to OFF, and unplug the unit.
• When the STANDBY/RUNkeyswitch is onSTANDBY, therecan-
not be power to the laser diode, butpowerisstillbeing sup-
plied to the laser head for temperature control.
WARNING Theinternalcircuitboardandpiezoelectrictransducersareat
highvoltageduringoperation.Theunitshouldnotbeoperated
with covers removed.
CAUTION AlthoughtheCEL isdesignedandpricedwiththeexpecta-
tionthattheend-usercanreplacethediodeandchangethe
alignment,somecomponentsarefragile.Inparticularthefilter,
piezoactuator,andoutputcouplerareveryeasilydamaged.
Pleasetakecareoftheseitemswhenworkinginsidethelaser.
The filter and output coupler are hard-coated and can be
cleanedbutgreatcareisneededaswithanyintracavitylaser
optics.
NOTE MOGLabs products are designed for use in scientific research
laboratories.Theyshouldnotbeusedforconsumerormedical
applications.
Label identification
TheInternationalElectrotechnicalCommissionlasersafetystandard
IEC60825-1:2007mandateswarninglabelsthatprovideinformation
on thewavelength andpower ofemitted laserradiation, and which
showtheaperturewhere laserradiationisemitted.Figures1and2
shows examples of these labels and their location on the CELlaser.