r e p ® l a n o s c l y c o c o m p u t e r R M o EF d ER el EN O C S E G 1.
Introduction Thank you very much for purchasing the CAT EYE OS 1.0. Read "SETUP GUIDE" first, for the installation and the basic operation of the product. Read this "REFERENCE GUIDE" when you want to know more about the CAT EYE OS 1.0. Important Warning! • Do not give excessive attention to the monitor or the data. Always pay attention to the road, traffic and your surroundings. • Keep this product away from children. If children should use this product, they should have adult supervision.
1. Buttons MENU button RESTART button START/STOP button (ENTER) REV FWD MODE button (SELECT) See how the four buttons work in the various modes. 1 Screen 2 Battery life indicator 3 Selected tire icon 4 Auto mode icon 5 Speed scale icon 6 Pacer 7 Selected function icon START/STOP button (ENTER) Normally this button starts and stops timer that effects the other functions like average speed, etc. When measuring, the speed scale icon flashes.
2. Functions Current Speed Current Speed always displays in the upper display. The data is updated once a second. When the font size is 100%, Current Speed appears between Clock Time and Elapsed Time and is indicated by the flashing Spd icon. 0.0(3.0)-65.9 mph [0.0(4.0)-105.9 km/h] Elapsed Time This is the ride time from the start to the present and shown in hours, minutes and seconds. Performing a reset operation returns the data to zero. After 9.59.59 the timer will continue counting from 0.00.00. 0.00.
Pace arrow The pace arrow indicates if the current speed is faster or slower than the average speed. If the current speed is equal to the average speed, both arrows appear. Eco mode (Sleep mode) When the main unit is left without receiving any signal for about five minutes, the display goes blank. When any main button is pressed, or the wheel starts again, the screen wakes up and returns to normal display.
3. Restart/Format/Setup Restart operation (1.When erratic data appears; 2.After replacing battery) After replacing the battery, the electric current can be unstable which might effect the operation of the OS1.0. To avoid this you must press the RESTART button after replacing the battery. Note: After restart operation, Elapsed Time, Trip Distance, Average Speed, Maximum Speed and Clock Time is erased. Set Clock Time again. Format operation (1.Before first use; 2.
Custom setup To personalize your Cat Eye OS1.0, select YES in e Custom setup prompt. Function customizing You can choose to display just the functions you would like. Press ENTER/START/STOP button to select each function you would like to display. You can also simply SELECT ALL to display all seven cyclocomputer functions. you can choose any of the following 6 functions (current speed is always displayed): Elapsed Time, Trip Distance, Average Speed, Maximum Speed, Total Distance and Clock.
4. Menu Screen When MENU button is pressed, the screen changes from measuring screens to menu screens. Measuring screen Menu screens are divided into two categories: "Data Review" reviews the previous recorded data; "Function Setting" allows you to change various settings. Note: In the Menu Screen, battery runs down faster than the normal measuring screen.
Data review Checks and reviews the accumulated data of the past. Press MENU button again to return to measuring screen. Last ride day data ENTER Shows all the data measured in the last ride day (0:00 (START/STOP) 23:59 or midnight to midnight). When the clock passes midnight, the day's data is memorized as the "last ride day data". SELECT (MODE) Maximum speed ever recorded The maximum speed ever recorded in the past is displayed together with the recorded date.
Menu Screen (continued) Function setting The function setting screens allow you to change various programmed functions. At any time press MENU button to return to normal measuring screens. Note: By pressing the two SELECT/MODE buttons simultaneously you can go back to Goes to previous screen the previous on screen. Auto mode When Auto mode is on, the unit automatically starts/stops measuring, whenever the computer receives a signal. icon will be on when it is activated.
Tire size setting Inputs two different tire sizes A and B. To input it by inch scale, choose EASY. For more accurate measurement, choose CUSTOM and input it in millimeters, by measuring the exact wheel circumference. Date setting Changes the date setting. It is important to input the correct date as it affects the accumulated data. Function customizing Selects only your favorite functions that you want to use (refer to page 12).
Menu Screen (continued) How to change setting A or B - Chooses your bike, A or B. • Press SELECT/MODE button to select A or B. • Press ENTER/START/STOP to decide. SIZE --- Changes the figure of the tire sizes A and B. “EASY” setting: inputs the figure by the inch size 14 inch - 27 inch; “CUSTOM” setting: inputs the figure by millimeters 10 9999mm Function customizing Select your favorite functions with SELECT/MODE button. Press SELECT/MODE button again to clear the selection.
5. Troubleshooting If a malfunction occurs, check the following items before contacting a dealer for service. Trouble Check items Remedy The liquid crystal screen appears dark or there are some dark spots. Was it left for a long time under direct sunlight? It will go back to normal after a few hours once it is out of the sunlight. Data will not be effected. Display response is slow. Was the ambient temperature too low [below 0C (32F)]? It will go back to normal when the temperature rises.
6. Specifications CAT EYE OS1.0 Display functions Current Speed 0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9 km/h] Elapsed Time 0:00’00” - 9:59’59” Trip Distance 0.00 - 99999.99 mile [km] Average Speed 0.0 - 65.9 mph [0.0 - 105.9 km/h] Maximum Speed 0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9 km/h] Total Distance 0.0 - 999999.9 mile [km] Clock Time 0:00 - 23:59 [AM12:00 - PM11:59] Pace Arrow Indicates if the current speed is higher or lower than the average speed.
Optional parts 34 12 5 6 7 1 Bracket sensor kit [169-9650] 2 Bracket sensor kit (Long) [169-9651] 3 Speed sensor kit [169-9670] 4 Speed sensor kit (Long) [169-9671] 5 Bracket [169-9660] 6 Magnet [169-9690] 7 Screw set [169-9680] 8 Lithium battery [166-5150] 8 Limited Warranty 1-Year Warranty for Main Unit Only (Accessories/Attachments and Battery Consumption excluded) If the computer main unit is operating defectively from normal use, the part of the main unit will be repaired or replaced free of charg
REGISTRATION CAT EYE Web Site (http://www.cateye.com) For warranty service you must register your product. Please register your OS1.0 as soon as possible. CAT EYE provides as much technical support as possible by telephone, e-mail and our web site. Please register on-line through our web site, or send the registration card below directly to our Customer Service Department. For registration, please fill in the product's serial number (the 7digits number marked on the back of the main unit). CO.,LTD.