Specifications

LCY-07084A-19
Table１4-1 Reliability test conditions
Table 12 Temperature condition is based on operating temperature condition
No. Test items Test condition
１ High temperature strong test Ta = +85℃ 240h
２ Low temperature strong test Ta =−40℃ 240h
３ High temperature and high
humidity operation test
Tp = +60℃, 90%RH 240h
４ Hi temperature operating test Tp = +85℃ 240h
５ Low temperature operating test Ta =−30℃ 240h
６ Electro static discharge test ±200V・200pＦ(0Ω) 1 time for each terminals
７ Shock test 980ｍ/s
2
・6ms， ±Ｘ；±Ｙ；±Ｚ 3 times for each direction
（JIS C0041, A-7 Condition C）【caution】
８ Vibration test Frequency : 8∼33.3Hz , Stroke : 1.3mm
Frequency : 33.3Hz∼400Hz,Acceleration : 29.4m/s
2
Cycle : 15 minutes
Ｘ,Ｚ 2 hours for each directions，4 hours for Ｙ direction
(total 8 hours) 【caution】（JIS D1601）
９ Heat shook test −30℃ ∼ +85℃ / 200 cycles
(0.5ｈ) (0.5ｈ)
【Note】 Ta = Ambient temperature, Tp = Panel temperature
【Check items】 In the standard condition, there shall be no practical problems that may
affect the display function.
【caution】 Definition of Ｘ，Ｙ，Ｚ direction is shown as follows
Ｘ
Ｙ
Ｚ