Specifications

LCY-07084A-3
(1) Summary
This TFT-LCD module is a color active matrix LCD module incorporating amorphous silicon TFT.
An outline of the module is given in Table 4-1.
(2) Features
･Utilizes a panel with a 15:9 aspect ratio, which makes the module suitable for use in wide-screen
systems.
･The 7.0 screen produces a high resolution image that is composed of 384,000 pixels elements in a
stripe arrangement.
･Graphics and texts can be displayed on a 800×RGB×480 dots panel with 262,144 colors
by supplying 18 bit data signals(6 bit/color).
･Wide viewing field angle technology is employed.(The most suitable viewing angle is in the 6 o'clock
direction.)
･By adopting an active matrix drive, a picture with high contrast is realized.
･Reduced reflection as a result of low reflection black matrix and an AG(antiglare) polarizer being
adopted.
･By COG method, realized a slim, lightweight, and compact module.
･Transparent intensity is raised by adoption of the rate LCD panel of a high aperture, a high
transparently color filter, and a high transparently polarizing plate.
・The quality picture of natural color reproducibility is realized by adoption in TN normally white mode
excellent in color reproducibility.
･An inverted video display in the vertical and horizontal directions is possible.
(3) Structure and Outline Dimensions
Outline dimensions of the module are given in Fig.1.
Structure of the TFT-LCD module are given in Fig.2.
This TFT-LCD module is composed of the color TFT-LCD panel, driver ICs, FPC, frame, shielding front
case and backlight unit.( circuit to drive the LEDbacklight is not built into this module.)
(4) Mechanical Specifications
Table4-1
Parameter Specifications Units Remarks
Screen size (Diagonal) １７.7 [7.0”] cm
Active area 152.40(W) × 91.44(H) mm
Display format 800 × RGB(W) × 480(H) dots
Dot pitch 0.0635(W） × 0.1905(H) mm
Pixel configuration R,G,B Stripe configuration
Outline dimension 170.0(W) × 104.0(H) × 8.0(D) mm 【Note４-1】
Mass 210±15 ｇ
【Note4-1】Typical values are shown.
For detailed measurements and tolerances, please refer to Fig.1.
( FPC(LED/LCD),FPC fixation sheet are excepted.)