Specifications

LCY-07084A-6
5-2）Backlight fluorescent tube driving part
Table5-4
Pin No. Symbol Description Remarks
1 A1 Input terminal (Anode 1)
2 A2 Input terminal (Anode 2)
3 NC
4 K1 Input terminal (Cathode 1)
5 K2 Input terminal (Cathode 2)
6 K3 Input terminal (Cathode 3)
7 NC
8 NC
(6) Absolute maximum ratings
Teble6-1 Absolute maximum ratings GND=0V
Parameter Symbol MIN MAX Unit Remark
Analog VSHA −0.3 +6.0 Ｖ Ta=25℃ Power supply
of source driver
Digital VSHD −0.3 +6.0 Ｖ 〃
Power supply VDD −0.3 +35.0 Ｖ 〃
of gate driver VCC−VSS −0.3 +6.0 Ｖ 〃
VEE−VSS −0.3 +35.0 Ｖ 〃
VDD−VEE(VSS) −0.3 +35.0 Ｖ 〃
Input signal Digital VID −0.3 VSHD+0.3 Ｖ 〃,[Note6-1]
Analog VIA −0.3 VSHA+0.3 Ｖ 〃,[Note6-2]
Common electrode
driving signal
VCOM −4 +6 Ｖ 〃
Storage temperature Ｔstg −40 85 ℃ [Note6-3,4]
Operating temperature
(LCD panel surface)
Ｔopr1 −30 85 ℃ [Note6-5,6]
Operating temperature
(Ambient temperature)
Ｔopr2 −30 65 ℃ [Note6-6]
Current of LED If − 150 mA Ta=25℃
[Note6-1] SPL､SPR､R0∼R5､G0∼G5､B0∼B5､LS､CK､LBR､MODE1､MODE2､U/L､SPS､CLS
[Note6-2] V0､V1､V2､V3､V4､V5､V6､V7､V8､V9､V10
[Note6-3] This rating applies to all parts of the module and should not be exceeded.
[Note6-4] Maximum wet-bulb temperature is 57℃. Avoid dew condensation on the module.
Otherwise electrical current leaks will occur , and it cannot meet the specifications.
[Note6-5] The operating temperature guarantees only operation of the circuit. For contrast, speed of
response, and other factors related to display quality are determined in the circumstances
with Ta=＋25℃.
[Note6-6] Ambient temperature when the backlight is lit (reference value).