Owner`s manual

owner’s manual - page 20
TM
Install Mirror
• Your Catrike comes with a mirror. Remove the bar-end cap from the left handlebar
and install mirror in the end of the handlebar.
Attach the flag
Your Catrike comes with a flag mount. Using the
M5x16 socket head cap screw provided, attach it
to the rear threaded hole of the left drop out. Place
the flag in the mount and use a zip tie to secure it.
It is normal for cables and assembled parts to settle and “bed in” during the first several days of riding. It is important to go over
the trike carefully during this break-in period and adjust anything that's loosened up. That means all fasteners, especially the
axle bolts and the tie rod nuts and bolts.
! IMPORTANT NOTE !
Attach Computer Sensor Mount
There is a hole on both spindle assemblies to mount the
Computer Sensor Mount on the desired side of your trike. The
Mount and the Bolt should be on the bottom of the spindle
assembly with only the lock-nut on top.
Attach Neck Rest
Your space neck rest comes
assembled in the box with
your trike.
Top M5 adjusting bolts
Neck Rest Stop
Bottom M5 adjusting bolts