Instructions / Assembly

Front Right Leg
Front Center Brace
Front Bottom Brace
Front
Vertical
Brace
Front Left Leg
2
Tap Caster sleeves into the bottom of the legs. Do Not insert wheels yet. Assemble
the Front Assembly by laying out the Front Right and Left Legs, Front Center Brace,
Front Bottom Brace, Front Vertical Brace as well as the necessary Bastions and 3/4”
Steel Pins as shown in Illustration 2A. Note: Front Center and Front Bottom Braces
are not slotted.
Tap the 3/4” Steel Pins into place on the Front Vertical Brace and attach to the Front
Center and Front Bottom Braces. Attach the leg to the Front Center and Bottom
Braces using the Bastions and Steel Pins.
Repeat the procedure to attach the other leg to compete Front Assembly.
Use Illustration 2B to properly orientate the legs and braces.
Finally, tap the 1” steel pin into the center pilot hole on the Front Center Brace. This
will be used later to support the middle shelf.
Illustration 2A
FRONT ASSEMBLY
Front Right Leg
Front Center Brace
Front Bottom Brace
Front
Vertical
Brace
Front Left Leg
Reverse/Inside view of the Front Assembly
Illustration 2B
Front View of the Front Assembly
1” Pin taps into center
hole on backside of
Front Center Brace
These holes not
used in assembly