User's Manual
Remtron
®
Engineered Systems
User Manual
18
9M02-9028-A021-EN
Version 4.0
Figure 4: Antenna Clearance
6.2.2 Receiver Location
To ensure safe and reliable system operation, the following items must be considered when selecting a location
for mounting the receiver:
• Install the receiver in an environment where the ambient temperature during operation does not drop
below -20º F (-28º C) or rise above +160º F (+71º C)
• All connections to the receiver enclosure must be watertight
• Avoid mounting the receiver enclosure on a surface where excessive vibration or shock is present
• For easy access to wiring and for service, provide sufficient room to open the enclosure door
• To ensure that the receiver enclosure is electrically at earth ground, remove all paint from the mounting-
hole surfaces (refer to Figure 5)
Figure 5: Mounting-Hole Paint Removal
• Mount the receiver enclosure securely using appropriate locking-type hardware. This also assists in
properly grounding the receiver enclosure to the mounting surface