User's Manual

Remtron

Engineered Systems

User Manual

9M02-9028-A021-EN

Version 4.0

3. Safety Rules

WARNING

Read all instructions. Failure to follow these rules can result in serious personal injury.

3.1 Installation

• GROUND THE RECEIVER CASE. In order to ensure safety of the system, firmly connect the receiver

case to earth ground

• PROVIDE A SAFETY CUTOFF SWITCH. If maintenance is required, disconnect the radio from power to

prevent accidental activation

• USE PROPER WIRING. Loose or frayed wires can cause accidental activation of machinery

• DO NOT INSTALL IN HOT AREAS. This apparatus can be damaged by heat in excess of 160º F

• DO NOT INSTALL IN HIGH VIBRATION AREAS. The life of this apparatus may be shortened through

long exposure to intense shaking or vibration

3.2 Personal Safety

• MAKE SURE MACHINERY IS CLEAR BEFORE OPERATING. Do not activate the remote system unless

it is safe to do so

• TURN OFF THE RECEIVER POWER BEFORE WORKING ON MACHINERY. Always disconnect the

remote system before doing any maintenance to prevent accidental operation of the machine

3.3 Care

• KEEP DRY. If water or other liquids get inside, immediately dry the unit

• KEEP ANTENNAS CLEAN. Keep antenna connections clean and free of corrosion

Note: Throughout this manual, other safety rules appear under the following heading:

WARNING

Failure to follow these rules can result in serious personal injury.