User's Manual

Setup Instructions for Macintosh OS X (10.3)
Note: Screenshots may be different, depending on your version of
the OS X operating system.)
1. Click on the Apple Menu in the top, left corner of your screen
and select System Preferences. (Fig 4.1)
2. Click on Network (Fig 4.2)
3. Click on the Show pull-down menu, and select Built-in Ethernet
(may be different depending on your computer model) (Fig 4.3)
4. Click the Configure pull-down menu and select Manually
■ Enter the IP address from your welcome letter in the
IP Address field
7
Figure 4.1
Figure 4.2
Figure 3.5
5. Click on the Gateway Tab (Fig 3.5)
■ Add the Gateway Address provided in your welcome letter
6. Click the OK button
7. Click OK at the Network window
8. You’re computer may ask you for your Windows disk, if so,
insert disc and follow the instructions
9. You should now be connected to the internet, open up Internet
Explorer to surf the web.
CavVelo DSL Modem Guide 1/13/05 9:31 AM Page 7