Installation Guide
Table Of Contents
- EURO_UC200-4130-1
- EURO_UC200-4130.2
- EURO_UC200-4130.3
- EURO_UC200-4130.4
- EURO_UC200-4130.5
- EURO_UC200-4130.6
- EURO_UC200-4130.7
- EURO_UC200-4130.8
- EURO_UC200-4130.9
- EURO_UC200-4130.10
- EURO_UC200-4130.11
- EURO_UC200-4130.12
- EURO_UC200-4130.13
- EURO_UC200-4130.14
- EURO_UC200-4130.15
- EURO_UC200-4130.16
- EURO_UC200-4130.17
- EURO_UC200-4130.18
- EURO_UC200-4130.19
- EURO_UC200-4130.20
- EURO_UC200-4130.21
- EURO_UC200-4130.22
- EURO_UC200-4130.23
- EURO_UC200-4130.24
- EURO_UC200-4130.25
- EURO_UC200-4130.26
- EURO_UC200-4130.27
- Back
Page 14
Range Hood Operations (Continued)
Control Panel Layout and Buttons Congurations:
Turning Fan OFF:
The 3-minute power-off delay function will only turn OFF fans. The light settings will not be affected by the delay
function.
Three-Minute Delay
While the fans are operating, press Power Control (On/Off) button once, the Power Control LED will ash •
and fans will turn OFF after 3-minutes.
During this 3-minutes delay, changing speeds will not affect the countdown.•
The 3-minute power-off delay function can be cancelled by pressing • press Power Control (On/Off) button
once while it is ashing.
Immediate Power-off
While the fans are in 3-minute power-off delay mode, press the illuminated• speed control button once to
turn OFF the fans immediately.
When the fans are operating in normal mode (Power Control LED not ashing), rapidly press the • Power
Control (On/Off) button twice to turn OFF the fans.
Light Control:
Light Control button operates independently from the Power Control (On/Off) and power-off delay function.
Pressing the Power Control (On/Off) button or activating the delay function will not turn halogen lights ON or
OFF. The lights have three settings: High, Low and OFF. CAUTION: DO NOT touch the lights until switched OFF
and cooled.
While the halogen lights are OFF, press the Light Control button once to turn halogen lights ON at High •
intensity. LED on Light Control will become illuminated.
Press the Light Control button again to change the light intensity to Low.•
Each touch of the Light Control button will cycle the light intensity through High, Low, and OFF.•
2. Three Speed Mechanical Control
Power Switch
Low Speed
Medium Speed
High Speed
Light Switch
Turn On:
Press the speed control (Low Speed, Medium Speed, High Speed) switch to select the desired level of power. •
Once button is pressed, the previous speed mode will cancel.
Press the Light Switch to power on the lights.•
CAUTION: DO NOT touch the lights until switched OFF and cooled.
Turn Off:
Press the Power Switch to turn off the power.•
Press the Light Switch to power off the lights•