Instructions / Assembly

Figure 8
Figure 7
Page 11
Installation (Continued)
Figure 6 Figure 9
Store excess wires in the wiring box.5.
Drop oil tunnel into recess support near rear of hood. Refer to Figure 8.6.
To install bafe lters and stainless spacer(s), refer to 7. Bafe Filters and Stainless Steel Spacers on Page 18 for
bafe lter and stainless spacer placement. Refer to Figure 9 for the following ve steps:
Angle bafe lter toward back of hood.
Push bafe lter up until almost level.
Slide forward into recess behind the front of hood.
Lower bafe lter.
Slide back until it ts into resting positions.
Repeat Step 7 to install all bafe lters and stainless spacers.8.
Turn powe ON in control panel. Check all lights and fan operations.9.
Make sure to leave this Installation Guide for the homeowner.10.