Instructions / Assembly
Page 12
Range Hood Operations
Control Panel Layout and Buttons Congurations:
In addition to the remote control feature, this range hood is also equipped with a heat sensor that will self-calibrate
in 5 seconds when the range hood is rst electrically activated and beeps when self-calibration is done. To con-
serve energy, the LCD panel will turn off automatically after 5 seconds of inactivity.
Adjusting Heat Sensitive Auto Speed (HSAS) Function:
• Press and hold Auto Function button to enter the temperature setting mode. °C or °F will appear in
LCD panel. Press Increase or Decrease button to select the desired temperature mode. The temperature setting
mode will exit automatically after 3 seconds of inactivity.
• Press Auto Function button will display the current room temperature in LCD panel. Press Auto Func-
tion button again to enter the HSAS temperature setting mode. User dened temperature and “Auto Function”
icon will appear in LCD panel. Press Increase or Decrease button to adjust to desired temperature from 45°C to
70°C (113°F to 158°F). The temperature setting mode will exit automatically after 3 seconds of inactivity.
• The heat sensor evaluates surrounding temperature continuously and increases the blower to highest
speed automatically when the user dened temperature is reached. When the surrounding temperature drops
below the user dened temperature, the blower returns to its original speed by decreasing one speed level every
2°C (3.6°F) drops.
Activating Normal Blower Function:
• While the range hood is off, press Increase or Decrease button to start the blower. Press Increase button
to increase blower speed (F1 to F4) as indicated in LCD panel. The Increase button cycles blower settings from
off (00), quiet speed (F1), low speed (F2), medium speed (F3) to high speed (F4).
• While the range hood is on and the blower is running, press Decrease button to decrease blower speed
(F4 to F1) as indicated in LCD panel. The Decrease button cycle blower settings from high speed (F4), to medium
speed (F3), low speed (F2), quiet speed (F1) to off (00).
Remote Control
Sensor
Power-Off
Delay
Light
LCD Panel
Decrease
Increase
Auto Function