Assembly Instructions

1. Turn the gas grill knob off.
2. Turn the gas cylinder valve off fully (turn clockwise to stop).
3. Detach the regulator assembly from gas cylinder valve by turning the quick coupling nut
counterclockwise.
4. Install the protective cap back onto gas tank valve.
Gas Connection
Regulator and Hose Requirements:
The regulator and hose used with your grill is CE approved, and complies with EN16129.
Gas Cylinder Requirements:
When using the gas grill, move the gas cylinder as far away as possible from the heat source,
placing it to the side of the gas grill.
The gas cylinder used shall not exceed 30lbs, with a maximum height including the regulator of
22.4-inches and a maximum diameter including the regulator of 12.2 inches.
If the smell of gas is detected after connection, close the gas cylinder valve and test for leakage.
6